TP-Link TL-MR3040 User Manual page 30

TL-MR3040
Wireless Network Name (SSID) - Enter a value of up to 32 characters. Click the
Survey button behind it, you can choose one of searching results to fill in this
field.
Security Mode – Please refer to the Appendix C: Security Mode.
Click Next and you will see the page as shown in Figure 3-21. Click Reboot to reboot the
2.
router and make the settings take effect.
Note:
After the rebooting, please change the PC's TCP/IP settings to "Use the following IP Address"
and "Use the following DNS Server Addresses" and enter the address and DNS server
address manually, and then reconnect to the network according to 3.2.1Connect to Network. If
Wireless Security is enabled, you need to enter the password you've just set to successfully
finish the connecting.
4. WISP Client Router Mode
Choose your WAN Connection type and click Next to continue.
1.
Portable 3G/3.75G Battery Powered Wireless N Router
Figure 3-20 Quick Setup – Client
Figure 3-21 Quick Setup – Finish
-20-