TP-Link TL-MR3020 Quick Installation Manual

Quick Installation Guide

Portable 3G/4G Wireless N Router
TL-MR3020
Configure the Router
3G/4G Router

Access Point

Internet
Wired Router
A
Repeater/Bridge
Internet
Host Router
Determine Operation Mode
Refer to the following scenarios to determine an appropriate operation mode.
C
A
3G/4G USB Modem
B
D
C
B
A
Mode Switch Operation Mode
3G/4G Router
3G/4G
WISP WISP Client Router
Access Point
AP
Repeater/Bridge
1 Switch the operation mode to 3G/4G and connect the
2 Connect your device to the router wirelessly. The SSID
3 Enter http://tplinkwifi.net in a web browser and create a
4 Go to Quick Setup, select your Time Zone and click Next.
5 Select your Mobile ISP or manually set them if your ISP is
6 Either customize your Network Name (SSID) and
B
7 Click Finish to apply the configuration.
1 Switch the operation mode to AP and connect the hardware
2 Connect your device to the router wirelessly. The SSID
3 Enter http://tplinkwifi.net in a web browser and create a
4 Select your Time Zone and click Next.
5 Select Access Point Mode and click Next.
6 Either customize your Network Name (SSID) and Password
7 Click Finish to apply the configuration.
1 Switch the operation mode to AP and connect the hardware
2 Connect your device to the router wirelessly or via an
3 Enter http://tplinkwifi.net in a web browser and create a
4 Select your Time Zone and click Next.
5 Select Repeater/Bridge Mode and click Next.
6 Click Scan to find the network you want to extend. Enter the
7 Either customize your Network Name (SSID) and Password
8 Click Save to apply the configuration .
9 Relocate the router about halfway between your host router
Scenario
I want to share the 3G/4G network with my local devices.
I want to have internet access from a wireless internet service
provider (WISP), and share the internet with local devices.
I want to access the internet wirelessly, but only a wired
network is available.
I want to extend my existing wireless network and connect a
wired-only device to the internet.
hardware according to the left diagram.
(wireless network name) and password are on the router's
label.
password for future logins.
Select 3G/4G Router Mode and click Next.
Note: For details about other modes, please refer to the User Guide at
www.tp-link.com.
not listed. Then click Next.
Password or keep the default ones, and then click Next.
If you have changed the default SSID and password, you have to
reconnect your wireless devices to the new Wi-Fi network.
according to the left diagram.
(wireless network name) and password are on the router's
label.
password for future logins.
or keep the default ones, and then click Next.
If you have changed the default SSID and password, you have to
reconnect your wireless devices to the new Wi-Fi network.
according to the left diagram.
Ethernet cable. The SSID (wireless network name) and
password are on the router's label.
password for future logins.
Password for the selected wireless network if it is encrypted.
or keep the default ones, and then click Next.
and the Wi-Fi dead zone.
If you have changed the default SSID and password, you have to
reconnect your wireless devices to the new Wi-Fi network.