TP-Link TL-MR3040 User Manual page 205

TL-MR3040
3) Repeater
Operation Mode - Shows the current operation mode.
Disable Security - Check this box radio button to disable wireless security. If disabled, the
wireless stations will be able to connect this device without encryption. It is strongly
recommended that you choose one of the security types to enable security.
WPA/WPA2 – Personal (Recommended) - Select WPA based on pre-shared key.
•
Version - You can select one of following versions.
Automatic (Recommended) - Select WPA-Personal or WPA2-Personal
1)
automatically based on the wireless station's capability and request.
WPA-Personal - Pre-shared key of WPA.
2)
WPA2-Personal - Pre-shared key of WPA2.
3)
•
Encryption - When you select WPA-Personal or WPA2-Personal for Authentication
Type, you can select either Automatic (Recommended), TKIP or AES as Encryption.
•
PSK Passphrase - Enter a passphrase here.
•
Group Key Update Period - Specify the group key update interval in seconds. The
value can be either 0 or at least 30. Enter 0 to disable the update.
WEP - Select 802.11 WEP security.
•
Type - You can select one of following types.
Portable 3G/3.75G Battery Powered Wireless N Router
Figure 6-12 Wireless Security – Repeater
-195-