TP-Link TL-MR3040 User Manual page 231

TL-MR3040
the "Virtual Servers" submenu. On the "Virtual Servers" page, click Add New...,
then on the "Add or Modify a Virtual Server" page, enter "80" into the blank next to
the "Service Port", and your IP address next to the "IP Address", assuming
192.168.0.188 for an example, remember to Enable and Save.
5. The wireless stations cannot connect to the Router.
Make sure the "Wireless Router Radio" is enabled.
1)
2) Make sure that the wireless stations' SSID accord with the Router's SSID.
3) Make sure the wireless stations have right KEY for encryption when the Router is
encrypted.
4) If the wireless connection is read
Address of your wireless stations.
Portable 3G/3.75G Battery Powered Wireless N Router
Figure A-9 Virtual Servers
Figure A-10 Add or Modify a Virtual se
y, but you can't access the Router, check the IP
rver Entry
-221-