Platter Effect - Denon DN S5000 - DJ Table Top Single CD Player Operating Instructions Manual

PLATTER EFFECT

12
This function is available for the Main Track and Alpha-Track.
#1
#2
#3
#4
#5
Select the Platter Effect Source
q When the SOURCE button is pressed and
held in for more than 1 second, the source
for which the Platter effect function is to be
used can be selected with
PARAMETERS knob.
DUMP /
PARAMETERS
RVS
PUSH
ON / OFF
SOURCE
MAIN:
1
The Platter effect function only affects the
Main Track.
a a TRACK:
The Platter effect function only affects the
Alpha-Track.
MAIN/a a T:
The Platter effect function affects both the
Main and Alpha-Track.
NOTE: The echo function cannot be used for
the Main and Alpha-Tracks
simultaneously.
q
r
u
o
!0
!1
!2
w, e t, y, q, !3
i, !0
DRAG-S (DRAG START):
Simulates the dragging sound of a belt drive
turntable starting up from a stop mode.
2 w The DRAG-S function can
DRAG-S
-1
the be turned on and off by
pressing the DRAG-S
button.
DRAG-S TIME:
When the DRAG-S turn on, the PARAMETERS
LED flashes and parameter are displayed.
If you use with default settings, there is a 4
second time out of inactivity for the DRAG-S
button once selected and PARAMETERS knob
if adjusted. After 4 seconds, and exits out of
2
-2
the DRAG-S menu.
e Or when the TIME
DRAG-S
(DRAG-S) button is
pressed and held in for
more than 1 second, the
DRAG-S time selection
mode is set.
r The DRAG-S time can
be selected with the
PARAMETERS knob.
• When the PARAMETERS knob is
2
-2
pressed, the time is entered and the
DRAG-S time
cancelled.
#1 The DRAG-S is activated when playback is
started with the 13
BRAKE/ECHO
BRAKE:
Simulates a winding-down sound of a vinyl
turntable coming to a full stop slowly.
ECHO (TAIL ECHO):
3
-1 Adds a echo sound when playback stops.
t The mode switches in the
following order each time
the DRAG-S button is
pressed: BRAKE → ECHO
→ off.
BRAKE TIME, ECHO TIME
When the BRAKE or ECHO turn on, the
PARAMETERS LED flashes and the BRAKE or
ECHO parameter are displayed.
If you use these 2 functions with default
settings, there is a 4 second time out of
inactivity for the BRAKE/ECHO button once
selected and PARAMETERS knob if adjusted.
After 4 seconds, and exits out of the BRAKE or
ECHO menu.
BRAKE TIME:
y Or when the TIME
TIME
(BRAKE/ECHO) button is
3
pressed and held in for
-2
more than 1 second while
BRAKE is selected, the
BRAKE time selection
mode is set.
u The BRAKE time can
be selected with the
PARAMETERS knob.
• When the PARAMETERS knob is
pressed, the time is entered and the
BRAKE time
cancelled.
#2 The BRAKE is activated when the
TIME
button is pushed during playback.
PARAMETERS ECHO TIME:
PUSH
ON / OFF
i Or when the TIME (BRAKE/ECHO) button
is pressed and held in for more than 1
second while ECHO is selected, the mode
for selecting the number of echo feedback
times is set.
o The time of ECHO can be selected with
selection mode is
the PARAMETERS knob.
!0 When the TIME (BRAKE/ECHO) button is
3
-2 pressed again (short press), the echo delay
button.
time can
PARAMETERS knob.
!1 The delay time of ECHO can be selected
with the PARAMETERS knob.
!2 When the PARAMETERS knob is pressed,
the data is entered and the echo time
setting mode is cancelled.
#3 The ECHO is activated when the
button is pushed during playback.
DRAG-S
DUMP/RVS
TIME
!3 The mode switches in the
following order each time
4
-1
the DUMP/RVS button is
pressed: DUMP → RVS →
off.
DUMP:
Reverse playback is performed for the
specified time. Plays the sound backwards
while continuing in a forward motion without
losing "elapsed time" when you return back to
4
-2 normal (forward) play.
#4 Each pushing the
between DUMP playback and normal
playback.
• The reverse play turns off when the Hot
Start or stutter is started.
BRAKE /
ECHO
RVS (REVERSE):
TIME #5 Each pushing the
between reverse playback and normal
4
-3
playback.
• The reverse play turns off when the Hot
PARAMETERS
PUSH Start or stutter is started.
ON / OFF
PLATTER MODE MEMO
The DRAG-S on/off setting and time data, the
BRAKE/ECHO on/off setting and time data and
the source for which the Platter effect function
is to be used can be stored in the preset mode.
selection mode is
5
• After making the desired settings, enter the
preset mode and stores the settings at
13
"PRESET (5)".
Once the settings are stored, they are
automatically set each time the power is
turned on. (See "PRESET" on page 23.)
ENGLISH
be selected with the
13
DUMP /
RVS
SOURCE
13 button switches
13 button switches
21