Platter Effect - Denon DN-S3000 Operating Instructions Manual

PLATTER EFFECT

12
#1
#2
#3
#4
DRAG-S (DRAG START):
Simulates the dragging sound of a turntable
starting up from a stop mode.
1 q The DRAG-S function can
-1
be turned on and off by
pressing the DRAG-S
button.
DRAG-S TIME:
When the DRAG-S turn on, the PARAMETERS
LED flashes and parameter are displayed.
1
If you use with default
-2
settings, there is a 4 second
time out of inactivity for the
DRAG-S button once
selected and PARAMETERS
knob if adjusted. After 4
seconds, and exits out of the
DRAG-S menu.
w
r
q e t
w The DRAG-S time can
PARAMETERS
PUSH
ON / OFF
be selected with the
PARAMETERS knob.
• When the PARAMETERS knob is
1
-3
pushed, the time is entered and the
DRAG-S time selection mode
cancelled.
#1 The DRAG-S is activated when playback is
started with the 13 button.
BRAKE
Simulates a winding-down sound of a turntable
coming to a full stop slowly.
Adds a echo sound when playback stops.
2
-1
e The BRAKE function can
be turned on and off by
pressing the BRAKE
button.
BRAKE TIME
When the BRAKE turn on, the PARAMETERS
LED flashes and parameter are displayed.
If you use with default
settings, there is a 4
second time out of
inactivity for the BRAKE
button once selected and
PARAMETERS knob if
adjusted. After 4 seconds,
and exits out of the BRAKE
PARAMETERS
PUSH
menu.
ON / OFF
r The BRAKE time can
2
-2
be selected with the
PARAMETERS knob.
• When the PARAMETERS knob is
pushed, the time is entered and the
BRAKE time selection
cancelled.
#2 The BRAKE is activated when the
button is pushed during playback.
is
DUMP/RVS
t The mode switches in the
following order each time
3
-1
the DUMP/RVS button is
pressed: DUMP → RVS →
off.
DUMP:
Reverse playback is performed for the
specified time. Plays the sound backwards
while continuing in a forward motion without
losing "elapsed time" when you return back to
3
-2
normal (forward) play.
#3 Each push of the
13
between DUMP playback and normal
playback.
• The reverse play turns off when the Hot
Start or stutter is started.
RVS (REVERSE):
#4 Each push of the
13
between reverse playback and normal
3
-3
playback.
• The reverse play turns off when the Hot
Start or stutter is started.
PLATTER MODE MEMO
The DRAG-S on/off setting and time data, and
mode is
the BRAKE on/off setting and time data for
which the Platter effect function is to be used
13
can be stored in the preset mode.
4
• After making the desired settings, enter the
preset mode and stores the settings at
"PRESET (5)".
Once the settings are stored, they are
automatically set each time the power is
turned on. (See "PRESET" on page 19.)
ENGLISH
button switches
button switches
17