Denon DN S5000 - DJ Table Top Single CD Player Operating Instructions Manual

Denon DN S5000 - DJ Table Top Single CD Player Operating Instructions Manual

Table top single cd player

Advertisement

Available languages

Available languages

Track Change:
Search/Scan:
Skip Search:
Frame Search:
Scratch:
Scratch Lever:
Hot Disc:
Hot Starts:
Clear Hot Starts:
Alpha Track:
Mirror Mix:
Pitch Range:
Key Adjust:
Brake/Echo:
Dump/Reverse:
DN-S5000 Quick Start Guide
Turn the rotary knob (on the upper right side) to desired track.
Move the "Fast Search" lever to search forward or search back.
Quickly shift and release the "Fast Search" lever to its end for 1-min hops.
Turn the scratch mode knob to "Search" turn the top scratch disc until point is
found, press main CUE to save your new point.
Insert Disc, turn scratch mode Knob to "MAIN", press lower left PLAY button,
manipulate the top vinyl disc as desired.
Select "Both" for natural scratching. Select "Fwd" to mute the reverse sound
of audio.
During play mode, press and hold the "Eject" button for more than 1 sec,
remove disc & insert new. Monitor, mix & play as normal.
Press the A1 or A2 button to set a cue point during play. Press the same
button again to re-trigger.
Press and hold the "FLIP" button corresponding to the same row for more
than 1 sec.
During Main play, press the alpha mode button, select track, monitor & mix
your Alpha track through the mixer.
During Main play, press and hold the alpha mode button for more than 1 sec,
press alpha play to start.
Press and hold the "Pitch" button for more than 1 sec, turn rotary knob to
select pitch, ( ± 4,10,16,24,100%) press enter to save your new setting.
Press the "Pitch" button until the orange "Key Adj." icon is shown above the
pitch % in the display. Button Cycle; Pitch On -> Pitch & Key On -> All Off.
Press the "Brake/Echo" button once to active "Brake", twice to activate
"Echo", a third to turn all off. Button Cycle; Brake -> Echo -> All Off.
Press the "Dump/Rvs" button once to set "Dump", twice for "Rvs", a third to
turn all off. Press the main PLAY/PAUSE to toggle on/off.
Button Cycle; Dump -> Rvs -> All Off.

Advertisement

Table of Contents
loading

Summary of Contents for Denon DN S5000 - DJ Table Top Single CD Player

  • Page 1 DN-S5000 Quick Start Guide Track Change: Turn the rotary knob (on the upper right side) to desired track. Search/Scan: Move the “Fast Search” lever to search forward or search back. Skip Search: Quickly shift and release the “Fast Search” lever to its end for 1-min hops. Frame Search: Turn the scratch mode knob to “Search”...
  • Page 3: Operating Instructions

    TABLE TOP SINGLE CD PLAYER DN-S5000 OPERATING INSTRUCTIONS INSTRUCCIONES DE OPERACION FOR ENGLISH READERS PAGE 116 ~ PAGE PARA LECTORES DE ESPA Ñ O L PAGINA 27~ PAGINA 47...
  • Page 4: Connection Cords For Signal Output (Rca)

    SPECIFIED HEREIN RESULT HAZARDOUS If problems occur, contact your DENON dealer. dangerous voltage points or short-out parts that could RADIATION EXPOSURE. 10. Ventilation – Slots and openings in the cabinet are provided result in a fire or electric shock. Never spill liquid of any 3.
  • Page 5 ENGLISH DEUTSCH FRANÇAIS ESPAÑOL NEDERLANDS SVENSKA TOP PANEL DIAGRAM / OBERES BEDIENFELD-SCHEMA / SCHEMA DU PANNEAU SUPERIEUR / DIAGRAMA DEL PANEL SUPERIOR / OVERZICHT VAN BOVENPANEEL / BILD ÖVER ÖVERSTA PANELEN @4 @6 $4 $3...
  • Page 6 FRONT PANEL DIAGRAM / VORDERES BEDIENFELD-SCHEMA / NOTE ON USE / HINWEISE ZUM GEBRAUCH / SCHEMA DU PANNEAU AVANT / DIAGRAMA DEL PANEL FRONTAL / OVERZICHT VAN OBSERVATIONS RELATIVES A L’UTILISATION / NOTAS SOBRE EL USO / VOORPANEEL / FRONTPANELEN ALVORENS TE GEBRUIKEN / OBSERVERA •...
  • Page 7 N’UTILISEZ PAS LE NETTOYEUR DE CAPTEUR D’OBJECTIF CD DENON AMC-22 POUR CE PRODUIT. CECI POURRAIT ENDOMMAGER LE CAPTEUR LASER DE CD DE CE PRODUIT. PRECAUCIÓN: NO UTILICE EL LIMPIADOR DE OBJETIVO DEL DETECTOR DE CD DEL DENON AMC-22 PARA ESTE PRODUCTO. ESTO PUEDE DAÑAR EL DETECTOR LASER DE ESTE PRODUCTO.
  • Page 8: Table Of Contents

    ENGLISH – TABLE OF CONTENTS – simultaneous playback of another track from the TAIL ECHO: Adds an echo sound when same disc, we call this the “Alpha-Track”. The playback is paused. ⁄0 Main features .............6 A/B trim ............18 playing pitch and output level for the Alpha-Track DUMP: Plays the sound backwards while ⁄1 can be independently adjusted.
  • Page 9: Connections/Installation

    Disc loading slot POWER button (¢ON £OFF) 3. If your mixer has Fader Start function such as our DENON DN-X800 or DN-X400, connect FADER 1, 2 jacks to • Load the CD. Load the disc slowly, and release • Push this button to turn power on and off.
  • Page 10 ENGLISH • A3, A4 CLR: A/B TRIM, SPLICE button (3) Top panel CAUTIONS: If the A3 or A4 button is pushed while pushing • Do not forcibly try to stop the Platter when • A/B TRIM: the FLIP button, you can clear the selected A With a short push of this button, the A it is turning.
  • Page 11 ENGLISH a a (Alpha) PITCH BEND – button DISPLAY MAIN/a a (Alpha), TITLE a a (Alpha) MODE, MIRROR MIX Pitch Slider • Use this slider to adjust playing speed. button button a a (Alpha) PITCH BEND + button • The playing speed decreases when slide •...
  • Page 12: Compact Discs

    ENGLISH PROG indicator COMPACT DISCS (4) Display • This indicator lights up when program data has 1. Precautions on handling compact discs been set and when program data is stored in • Do not allow fingerprints, oil or dust to get on the the memory.
  • Page 13: Basic Operation

    ENGLISH BASIC OPERATION Pitch Bend • With PITCH BEND function you can change pitch • Normally the BPM for the currently playing track is Play and pause Move the Cue point temporary. DN-S5000 has three ways for this measured and displayed on the auto BPM counter. function PITCH BEND buttons and Scratch Disc.
  • Page 14: Scratch

    ENGLISH SCRATCH Main Hot Disc • The disc can be ejected while still Main Track playing. You can Scratch in CD or Sampler mode. Also you can select the Scratch sound direction to (turn direction of Scratch Disc), both and forward. These selections give you variety of Scratch effects. Data loading Change output When the !0 DISC EJECT button...
  • Page 15: Playing The Alpha Track (Real Time Sampler)

    ENGLISH PLAYING THE ALPHA TRACK (Real Time Sampler) Back Cue Alpha-Track playback Adjust sound level and pitch r In the Alpha-Track The Alpha-Track and Sampler playback sound • The Alpha-Track function lets you play one more track (the Alpha-Track) while playing the Main Track. SAMP.
  • Page 16 ENGLISH Mirror Mix Alpha Track Hot Disc • The Alpha-Track can be played with a delay of the specified beat or time after the Main Track. • The disc can be ejected while still Alpha-Track playing. Change output Data loading When the !0 DISC EJECT button Once cueing is completed, stop playback, and when the #2 a...
  • Page 17: Alpha Mode (Alpha-Track Monitor)

    ENGLISH ALPHA MODE (Alpha-Track Monitor) Switching Alpha-Track and Main Track • After you prepared your Alpha-Track, you This function lets you play the Alpha-Track from ALPHA OUT while playing the Main Track. Using this function, can switch the sound between Alpha-Track you can prepare the next song on same CD before the end of your first track.
  • Page 18: Seamless Loop/Hot Start/Stutter And Splice

    ENGLISH SEAMLESS LOOP/HOT START/STUTTER AND SPLICE Stutter • A1 and A2 points can be also used for Seamless Loop/Hot Start/Stutter (A1, A2 buttons) Stutter playback. t To enable stutter playback, Operation display (refer to the push FLIP button for A1/A2 section describing the display) t, y q, w, y...
  • Page 19 ENGLISH Splice • Use this function to skip a section between A and B points. The A point is the point from which jumping starts, the B point the point at which jumping ends. • The A1 and A2 Hot Starts and Stutter functions cannot be used if both Splice points are set in the Splice mode. w, r, t Start splice playback Splice point setting mode...
  • Page 20: A/B Trim

    ENGLISH A/B TRIM A/B move Select B point (in A-B Trim) y Select the A-B Trim mode • The Seamless Loop, Sampler loop and splice A and B points can be fine-adjusted using Scratch Disc. Select A and B points •...
  • Page 21: A3/A4 For Sampler, 4 Hot Start, Alpha-Track Hot Start

    ENGLISH A3/A4 FOR SAMPLER, 4 HOT START, ALPHA-TRACK HOT START The buttons of A3, A4 and corresponding FLIP, B and EXIT/RELOOP are used for Sampler, 4 Hot Start and Alpha- Track Hot Start functions. A3/A4 mode Sampler mode: The A3 and A4 buttons lights up in green. •...
  • Page 22 ENGLISH Sampler Exit and Reloop u The EXIT/RELOOP button DN-S5000 has two Samplers of 15 seconds length. These Samplers are also used in looping playback. can be used same as Seamless Loop function. i, !0 q, r, !0 w, o y, u Reverse Play i You can play Sampler sound in...
  • Page 23: Platter Effect

    ENGLISH PLATTER EFFECT r The DRAG-S time can PARAMETERS ECHO TIME: PUSH ON / OFF be selected with the i Or when the TIME (BRAKE/ECHO) button This function is available for the Main Track and Alpha-Track. PARAMETERS knob. is pressed and held in for more than 1 second while ECHO is selected, the mode for selecting the number of echo feedback •...
  • Page 24: Memo (Custom Setting Memory)

    ENGLISH • When the playing pitch is loaded from the Memo with PITCH LED flashes, playing Pitch is locked until MEMO (Custom Setting Memory) Pitch Slider comes same Pitch. While playing Pitch is locked, PITCH LED keeps flashing. CD setting information can be stored in the non-volatile memory. The stored information can be called out of the Memo Call in Alpha-Mode memory later, making it easy to prepare for your mixing.
  • Page 25: Preset

    ENGLISH (16) MEMO ALL COPY : PRESET Copy all MEMO data from the master unit of DN-S5000 (or DN-D9000, DN-2600F) to the slave unit of DN-S5000 (or DN-D9000) when both unit are connected by the normal straight Cable. (See 1. Preset mode q The preset mode is available when PRESET button is pushed for more than 1 sec while DN-S5000 is in diagram for the cable.) NOTE: Be sure CD player have no discs inside.
  • Page 26: Program/Random/Relay Play/Power On Play

    ENGLISH PROGRAM/RANDOM/RELAY PLAY/POWER ON PLAY #2 Clear Tracks from Program • You can clear tracks from the previously programmed tracks. Program play • One track can be cleared at a time using • Up to 25 tracks from one disc can be programmed. the PITCH BEND –...
  • Page 27 ENGLISH Random playback Relay playback • With the random play function, tracks are selected at random and played from the disc. • Relay Play function is a playback mode to continue play tracks of CDs in two DN-S5000s. • Connect the X-EFFECT IN/OUT terminals between two DN-S5000s. NOTE: Such functions as Hot Start, Sampler, Mirror Mix and Platter Effect do not operate during random playback.
  • Page 28: Specifications

    ENGLISH SPECIFICATIONS REPLACING THE BELT GENERAL • On the DN-S5000, the platter is driven by a belt. Type: Compact disc player In the unlikely case of trouble, use the procedure described below to replace the belt. Disc type: Standard compact discs (12 cm discs), CD-TEXT CD-R, CD-RW discs NOTE: Finalized CD-R or CD-RW discs can be played back in this unit.
  • Page 29 ESPAÑOL – INDICE – ALPHA-MODE DUMP: Reproduce el sonido en sentido La salida Alpha-Track puede oírse a través de las inverso al mismo tiempo que sigue ⁄0 Características principales ........69 A/B Trim............81 clavijas ALPHA OUT RCA de forma separada, de moviéndose hacia delante, siempre ⁄1 Conexiones/Instalación........70...
  • Page 30 • Cargar el CD. Cargue el disco lentamente y • Pulse este botón para encender y apagar su 4. Si tiene un DENON DN-X800 mixer, puede utilizar la función X-Effect para controlar los Hot Starts, Samplers y suéltele una vez que la unidad DN-S5000 inicie equipo.
  • Page 31 ESPAÑOL • FLIP: Start, utilícelo para ajustar el punto B para A3 (3) Panel superior PRECAUCIÓN: Si se encuentra en el modo 4 Hot Start o o el botón A4 para seamless looping. • No fuerce la detención del plato cuando Alpha-Track Hot Start, este botón funcionará...
  • Page 32 ESPAÑOL • Es necesario crear un punto Cue para el Alpha- • PITCH/VOL: • RANDOM: Barra de Pitch (Pitch Slider) Track antes de comenzar la reproducción Después de pulsar durante más de un Una vez seleccionado el modo Program, • Utilice esta barra para ajustar la velocidad de Alpha-Track.
  • Page 33 ESPAÑOL Indicador KEY ADJ. LOS DISCOS COMPACTOS (4) Display • El símbolo de KEY ADJ. aparece en el 1. Cuidados a tener durante la manipulación de los visualizador si la unidad se encuentra en el discos compactos modo Key Adjust. •...
  • Page 34 ESPAÑOL OPERACIONES BÁSICAS Mover el punto Cue Pitch Bend • Si no desea iniciar la reproducción desde el inicio de • Con la función PITCH BEND podrá cambiar el pitch • Normalmente el BPM de la pista de reproducción Reproducción y Pausa la pista, necesita mover el punto Cue utilizando la de forma temporal.
  • Page 35 ESPAÑOL SCRATCH Main Hot Disc • El disco puedo expulsarse mientras se reproduce en modo Main Track. Podrá hacer scractch en modo CD o sampler. Además, puede seleccionar la dirección del sonido Scratch (cambiar la dirección del disco Scratch) a ambos lados o hacia delante. Estas selecciones le darán una variedad de efectos de scratch.
  • Page 36 ESPAÑOL REPRODUCCIÓN DE ALPHA-TRACK (Sampler en tiempo real) Pausa en la reproducción de Alpha-Track Reproducción en modo Stutter del Alpha- e Pulse el botón a para Track • La función Alpha-Track le permitirá reproducir una pista más (el Alpha-Track) mientras esté reproduciendo la SAMP.
  • Page 37 ESPAÑOL Mirror Mix Alpha Track Hot Disc • Alpha-Track puede reproducirse con un retardo del ritmo o de la duración especificados después de Main • El disco puede expulsarse mientras se reproduce Alpha Track. Track. Carga de datos Cambiar salida Cuando se mantiene pulsado el Una vez finalizada la operación botón !0 DISC EJECT durante...
  • Page 38 ESPAÑOL ALPHA-MODE (Monitor Alpha-Track) Salir del Alpha-Mode MIRROR MIX Alternar entre la Alpha-Track y la pista t Puede salir del Alpha-Mode principal Esta función permite reproducir el Alpha-Track desde ALPHA OUT mientras se esté reproduciendo la pista pulsando el botón ALPHA- principal.
  • Page 39 ESPAÑOL SEAMLESS LOOP/HOT START/STUTTER Y SPLICE Stutter • Loa puntos A1 y A2 también pueden usarse Seamless Loop/Hot Start/Stutter (botones A1, A2 ) para la reproducción Stutter. Visualización del funcionamiento t Para habilitar la reproducción (remítase a la sección de descripción de t, y q, w, y stutter, pulse el botón FLIP...
  • Page 40 ESPAÑOL Splice • Use esta función para saltar una sección entre los puntos A y B. El punto A es el punto desde el cual empieza el salto, el punto B es el punto en el que finaliza el salto. •...
  • Page 41 ESPAÑOL A/B TRIM A/B Move Seleccione el punto B (in A-B Trim) y Seleccione el modo A-B Trim y • Los modos Seamless Loop, Sampler loop y los puntos de unión A y B pueden ajustarse con más precisión Seleccione los puntos A o B para seleccionar el punto B, utilizando el botón Scratch Disc.
  • Page 42 ESPAÑOL A3/A4 PARA SAMPLER, 4 HOT START, ALPHA-TRACK HOT START Los botones de A3, A4 y los correspondientes FLIP, B y EXIT/RELOOP se utilizan para las funciones Sampler, 4 Hot Start y Alpha-Track Hot Start. Modo A3/A4 Seleccione el modo A3/A4 Los botones A3 y A4 puede utilizarse para uno de los tres modos descritos a continuación.
  • Page 43 ESPAÑOL Sampler Selección del modo Sampler Loop Borrar los datos del Sampler Puede seleccionar el modo lo bucle para !0 Pulse el botón SAMP (SAMP1 o SAMP2) La unidad DN-S5000 dispone de dos samplers de 15 segundos de duración. Estas muestras se utilizan también Sampler cuando se detenga la reproducción del mientras pulsa también el botón para la reproducción de bucles.
  • Page 44 ESPAÑOL PLATTER EFFECT • Cuando pulsa botón !0 Cuando se pulsa de nuevo (presión corta) el PARAMETERS, se introduce la hora y se botón TIME (BRAKE/ECHO), puede Esta función está disponible para las opciones Main Track y Alpha-Track. cancela el modo de selección de seleccionarse el tiempo de retardo del eco duración de DRAG-S.
  • Page 45 ESPAÑOL (2) MEMO Call [Memo Call] MEMO (Memoria de ajuste personalizado) • Cuando el CD incluya pistas en las que DN-S5000 haya insertado un Memo, el indicador de MEMO parpadeará durante 5 segundos. La información de configuración del CD puede almacenarse en memoria no volátil. Esta información almacenada •...
  • Page 46 ESPAÑOL (16) MEMO ALL COPY : PRESET Copie todos los datos MEMO de la unidad maestra del DN-S5000 (ou del DN-D9000,DN-2600F) a la unidad esclava del DN-S5000 (ou DN-D9000) cuando ambas unidades están conectadas mediante 1. Modo Preset el cable sin cruzar normal. (Vea el diagrama para el cable). q El modo preset está...
  • Page 47 ESPAÑOL PROGRAM/RANDOM/RELAY PLAY/POWER ON PLAY Reproducción del programa (Program Play) • Se puede programar hasta 25 pistas por disco. • En la memoria no volátil se pueden almacenar programas para seis discos (un programa por disco). NOTA: Algunas funciones, como Hot Start, Sampler, Mirror Mix, y Platter Effect no funcionan durante la reproducción programada.
  • Page 48 ESPAÑOL Reproducción aleatoria (Random Playback) Reproducción por turnos (Relay Playback) • Con la función de reproducción aleatoria, las pistas del disco se seleccionan y reproducen de forma aleatoria. • La función de reproducción por turnos es modo de reproducción en el que se reproducen de forma continua las pistas de los CDs en dos unidades DN-S5000.
  • Page 49 ESPAÑOL ESPECIFICACIONES SUSTITUCIÓN DE LA CORREA • En las DN-S5000, el Platter es conducido por una correa. GENERALIDADES Utilice el procedimiento que se describe a continuació n para reemplazar la correa por la correa incluida. Tipo: Reproductor de disco compacto. Tipo de discos: Disco compacto estándar (12 cm),CD-TEXT.

This manual is also suitable for:

Dn-s5000

Table of Contents