Porsche 928 - WORKSHOP MANUAL 1977 Workshop Manual page 278

TOOLS
Note:
All parts (1 through 61 can be used for 928 and 944 cars.
Pressure gauge is connected between pressure line and steering gear (944: between power pump and
pressure line).
If old pressure gauge no. 3 (see below1 is used, make sure high pressure hoses no. 2 and no. 5 are
connected on pressure gauge in correct position (opposite sides as for 944).
Connection of high pressure hoses on pressure gauge no. 3 a, on the other hand, can be made on any side
928
Steering
48
0 y.-
3:2!
aL- -
TOOL TABLE - PAGE 48.10
* Threads will be M 18 x 1.5 or M 16 x 1.5 depending on pressure gauge version (see Tool Table1
Printed in Germany VII, 1983
Checking Hydraulic Function of Steering
lPress"re Test1
48.9