Porsche 928 - WORKSHOP MANUAL 1977 Workshop Manual page 209

928
Brakes/Mechanical Parts
46
DISASSEMBLING AND ASSEMBLING FRONT WHEEL BRAKE
Disassembling
l.Remove brake caliper (do not
disconnect brake hose) and place
on upper control arm or attach
to suitable support with a piece
of wire.
Mounting, until end of model year
85
2.Take off brake disk after
removing countersunk bolt (s). If
a brake disk is so tightly seated
that light blows with a nylon-
headed hammer do not move it,
screw hex bolts uniformly into
the two 8 mm threads of the disk
and press disk off. It is
possible that the bolts do not
sit squarely on the lugs. A
modification has been incor-
porated.
Mounting, 86 models onward
(fixed-caliper brake)
Assembling
l.Inspect all parts and replace if
there is any sign of damage.
2.Clean centering face for brake
disk on wheel hub and apply a
thin coat of Optimoly TA.
Printed in Germany -
XIII, 1986
Disassembling and Assembling 46 - 11
Front Wheel Brake