Porsche 928 - WORKSHOP MANUAL 1977 Workshop Manual page 262

48
Steering
926
Cross Reference Survey:
Steering Gear Version
Identification
Steering Gear
(LHD only)
stop
Spacer
Part No. Part No.
(left and right)
1. Old version 928.347.010.22 928.347.329.00 926.347.331 .oo
Rack 795 mm long
Rack end dia.
left 26 mm,
right 25 mm
2. Interim version
Rack 795 mm long
Rack end dia.
left 26 mm
right 23 mm
928.347.010.22 928.347.329.00 928.347.331 .OO
3. New/current version
Rack length 810 mm
Rack end
dia. left and right 23 mm
(928.347.010.24)
(928.347.010.26)
928.347.010.27'
928.347.329.03
bzw.
928.347.329.04
see text below
none
The steering gears with Part No. 928.347.010.22 (former version and interim solution)
are no longer available. They should be replaced with the new/current version.
The steering gears of the new version 928.347.010.24 and 928.347.010.26 indicated in brackets
have
since been
deleted as
well (status as of December, 1994).
All former steering gear versions are to be replaced with the current version, 926.347.010.27.
The elastic steering stop, 928.347.329.03, for left and right sides is replaces by a solid
steering stop, 928.347.329.04, for improvement in quality. At the same time it was necessary
to replace the dust cover, 928.347.191.02, with
a
new version dust cover having a supporting lip,
Part No. 928.347.191.03.
48 - 6b
Safety specifications for handling airbag vehicles
0
Prlnled I" Germany - XXXIV, 1994