Porsche 928 - WORKSHOP MANUAL 1977 Workshop Manual page 261

Steerino
48
a
3. Fill system with hydraulic fluid, bleed and
check for leaks as well as correct oper-
ation (see page 48 - 9)
4. If necessary (with new parts), adjust toe. In
conjunction with this matter,
remember
taht there are different steering stop ver-
sions (see text below). As of Model Year
1986, the tie rod was changed as well.
Be
sure to
ObSeNe
this difference when re-
placing parts (also refer to page 40 - 17).
Steering stop versions
The steering stop has also been changed be-
cause of changes on the steering gear (rack
deep-bore drilled and 15 mm longer, smaller
diameter on ends of rack).
Stop of Changed Version
Part No. 928.347.329.03 or
Present Version
Part No. 928.347.329.04
Stop 928.347.329.03 is no longer available for
replacements. See cross reference survey
on page 40 - 6 b.
928.347.329.03 (rubber I metal)
Stop of Old Version
Part No. 928 347.329.00
- opening on one side with two surfaces
in conjunction with spacer, Part No.
928.347.331 .oo
1.m
'i-/i !
'a. z
,.J ./'
Ash
I
.7.
/ ' - \,
Q
I
0.
928.347.329.04 (aluminium)
Rem. and Inst. Steering Gear I Steering Stop Vers.
Printed In Germany - XXXIV, 1994
40 - 6a