General Commands; Command Line Editing Commands - Dell PowerVault 50F Installation And Troubleshooting Manual
Dell powervault 56f 16-port fibre channel switch installation and troubleshooting guide
Hide thumbs
Also See for PowerVault 50F:
- Installation and troubleshooting manual (156 pages) ,
- User manual (42 pages) ,
- Rack installation manual (28 pages)
Table of Contents
Advertisement
support.dell.com
"" #
This chapter contains information and examples on managing and monitoring the
PowerVault 56F 16-Port Fibre Channel switch by way of Telnet, including:
General commands
Diagnostic commands
The user can configure, operate, and test the switch using the following commands
and settings through the Telnet interface.
The following general commands allow you to control basic switch operations.
NOTE: For zone-specific commands, refer to the Dell PowerVault 5xF Switches Zoning
Guide.
The Telnet session responds to UNIX editing commands. Table 4-1 lists command
line editing commands.
NOTE: The command line interface does not support keyboard buffering. Wait for the
command prompt to appear before issuing a switch command.
Scroll backwards through previous commands
k or -
Scroll forward through previous commands
j or +
Insert text after cursor
a
PowerVault 56F 16-Port Fibre Channel Switch Commands
4-1
Advertisement
Table of Contents
