Chapter 4 Powervault 51F Commands; General Commands; Command Line Editing Commands; Table 4-1. Command Line Editing Commands - Dell PowerVault 50F Installation And Troubleshooting Manual

support.dell.com
C H A P T E R 4
PowerVault 51F Commands
This chapter contains information and examples on managing and monitoring the
PowerVault 51F switch via Telnet, including:
•

General commands

•
Routing commands
The user can configure, operate, and test the switch using the following commands
and settings through the Telnet interface.
General Commands
The following general commands allow you to control basic switch operations.

Command Line Editing Commands

The Telnet session responds to UNIX editing commands. Table 4-1 lists command line
editing commands.
NOTE: The command line interface does not support keyboard buffering. Wait for the
command prompt to appear before issuing a switch command.

Table 4-1. Command Line Editing Commands

Command Description
Scroll backwards through previous commands
k or -
Scroll forward through previous commands
j or +
Insert text after cursor
a
Insert text before cursor
l
Insert text at end of current line
A
Delete entire line
dd
Delete from cursor to end of line
D
PowerVault 51F Commands 4-1