Connecting An Ipod; Connecting The Power Supply Cord - Denon DHT-FS3 Owner's Manual

Connecting an iPod ®
<View from the bottom>
• Use the separately sold Control Dock for iPod (ASD-1R) to connect an iPod to the DHT-FS3.
• When using a Control Dock for iPod (ASD-1R), the communications mode selection switch must be set.
For details, refer to the operating instructions of the Control Dock for iPod.
• When connecting the exclusive Control Dock for iPod (ASD-1R, sold separately), connect the Control
Dock for iPod with the system cable included with the dock.
• When the Control Dock for iPod is connected, the function indicator switches from "AUX" to "iPod" .
• When an Control Dock for iPod (ASD-1R) is connected, the input level adjustment is automatically set to
"+6 dB" (vpage 11).
L L
R R
System cable
(Included with the Control
Dock for iPod)

ENGLISH
Connecting the power supply cord
<View from the bottom>
NOTE:
• Insert the plugs securely. Incomplete connections will result in the generation of noise.
AC outlet (wall)
Power cord
(included)
U.S.A., Canada models
AC 120 V, 60 Hz
European models
AC 230 V, 50 Hz
ENGLISH