Operation; Playing The Sound From The Tv - Denon DHT-FS5 Owner's Manual

Denon dht-fs5: user guide
Hide thumbs Also See for DHT-FS5:
Table of Contents

Advertisement

ENGLISH
[NIGHT MODE]
[SDB]
About the button names in these explanations
< >
: Buttons on the main unit
[ ]
: Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
0

Operation

[ON / STANDBY]
[INPUT]

Playing the Sound From the TV

[ANALOG (An)]
1
Select the input function using
[MODE SELECT]
The input function is displayed for about 5 seconds on the display.
(
~
,
)
2
Select the surround mode using
[MUTE]
[SETUP]
Mode
(lit for about 5
[VOLUME + –]
MOVIE
STEREO
MUSIC
NEWS
b
The surround mode is set to "MOVIE" upon purchase.
b Depending on the source being played, it may not be possible
to achieve a satisfactory effect. In this case, try other modes to
create a sound field to your liking.
b When playing the sound of a TV, the volume may increase suddenly
when a commercial starts. This is because the audio input signal
has switched, and is not a malfunction. If the difference in volume
level bothers you, we recommend using the "MOVIE" or "MUSIC"
mode in which there is less difference in volume between different
signals.
[INPUT]
.
[MODE SELECT]
.
Display
Features
seconds)
Provides the atmosphere of an
expansive sound field for movie
sources.
T h i s m o d e i s s u i t e d f o r
2 - c h a n n e l m u s i c s o u r c e s ,
providing the atmosphere of a
sound field played from directly
in front, like a 2-channel stereo
system.
This mode is suited for playing
live music sources, playing
music with an expansive sound
field that seems to envelop you.
This mode makes TV news
programs and the dialogues of
drama programs easier to hear.
3
Start playback on the selected device.
b For instructions on operating, see the operating instructions of the
connected component.
4
[VOLUME]
Use
to adjust the volume.
The volume level is displayed.
b The volume can be adjusted from 0 to 34.
Turning the Sound Off Temporarily
[MUTE]
Press
.
The volume level appears on the display and the power indicator
flashes green.
[MUTE]
b Either press
again or adjust the volume to cancel the mute
mode.
Boosting the Bass Sound
[SDB]
Press
.
The current setting appears on the display for about 5 seconds.
)"
b The mode switches between "On (
and "Off (
is pressed again while the current setting is displayed.
b This mode is set to "On" upon purchase.
When Listening With the Volume Turned Down at
Night, etc.
When set to "On" while listening with the volume turned down at
night, etc., the dialogues, etc., are easier to understand.
[NIGHT MODE]
Press
.
The current setting appears on the display for about 5 seconds.
b The mode switches between "On (
)" and "Off (
MODE]
is pressed again while the current setting is displayed.
b This mode is set to "Off" upon purchase.
b Effective for "Dolby" digital input audio signals.
)"
[SDB]
if
[NIGHT
)" if

Advertisement

Table of Contents
loading

Table of Contents