Denon AVR-985 Operating Instructions Manual page 94

Av surround receiver
Hide thumbs Also See for AVR-985:
Table of Contents

Advertisement

System setup items and default values (set upon shipment from the factory)
1. Auto Setup/Room EQ
Auto Setup/Room EQ
Power Amp
1
Auto Setup
Assignment
Manual EQ
This parameter is for optimizing the Room EQ with which the audio
2
Setup
signals are produced from the speakers.
Room EQ
3
Set the Room EQ setting with All or Assign for each surround mode.
Setup
Direct Mode
Set the ON/OFF setting of Room EQ, in the case of the surround
4
Setup
mode is in Direct or Pure Direct.
Set this to switch the Mic Input jack for use for Mic or V.Aux L-
5
Mic Input Select
channel input jack.
2. Speaker Setup
Input the combination of speakers in your system and their
Speaker
corresponding sizes (SMALL for regular speakers, LARGE for full-
1
Configuration
size, full-range) to automatically set the composition of the signals
output from the speakers and the frequency response.
This parameter is for optimizing the timing with which the audio
2
Delay Time
signals are produced from the speakers and subwoofer according to
the listening position.
This adjusts the volume of the signals output from the speakers and
Channel
3
subwoofer for the different channels in order to obtain optimum
Level
effects.
Crossover
Set the frequency (Hz) below which the bass so of the various
4
Frequency
speaker is to be output from the subwoofer.
5
Subwoofer Mode
This selects the subwoofer speaker for playing deep bass signals.
3.Input Setup
Digital In
This assigns the digital input jacks for the different input
1
Assignment
sources.
Ext. In
2
Subwoofer
Set the Ext. In Subwoofer terminal playback level.
Level
Component
This assigns the color difference (component) video input jacks for
3
In Assign
the different input sources.
Video Input
4
Set the input signal to be output from the monitor output terminal.
Mode
Auto Tuner
5
FM stations are received automatically and stored in the memory.
Presets
94
Set this to switch the surround back channel's
power amplifier for use for zone2.
Speaker Setup
Input Setup
Front Sp.
Center Sp.
Large
Small
Front L & R
Center
12 ft (3.6 m)
12 ft (3.6 m)
Front R
Center
Front L
0 dB
0 dB
0 dB
Input
CD
DVD
VDP
source
Digital
COAX1
COAX2
OPT1
Inputs
DVD
VDP
TV
VIDEO1
NONE
VIDEO2
A1 ~ A8
87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz
B1 ~B8
520/600/1000/1400/1500/1710 kHz/90.1/90.1 MHz
C1 ~C8
90.1 MHz
D1 ~D8
90.1 MHz
E1 ~E8
90.1 MHz
F1 ~F8
90.1 MHz
G1 ~G8
90.1 MHz
Default settings
SURROUND BACK
All Channel and Frequency=0dB
All
OFF
Mic
Default settings
Subwoofer
Surround Sp.
Yes
Small
Subwoofer
Surround L & R
12 ft (3.6 m)
10 ft (3.0 m)
Surround
Surround
Surround
L
R
Back L
0 dB
0 dB
0 dB
80Hz
LFE
Default settings
TV
DBS
V. AUX
VCR-1
OFF
OPT2
OPT5
OPT3
Subwoofer = +15 dB
DBS
VCR-1
VCR-2
V. AUX
VIDEO3
NONE
NONE
NONE
AUTO
Surround Back Sp.
Small / 2spkrs
SBL & SBR
10 ft (3.0 m)
Surround
Subwoofer
Back R
0 dB
0 dB
VCR-2
CDR/TAPE
OFF
OPT4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avr-985sAvr-2805sAvr 2805 - av receiverAvr-3805

Table of Contents