Denon AVR-985 Operating Instructions Manual page 26

1-3 Setting the Room EQ Setup
Select the setting of an Equalizer that has been set with Auto Setup or Manual EQ.
1
(Remote control unit)
2
(Remote control unit)
3
(Remote control unit)
4
(Remote control unit)
5
(Remote control unit)
26
Select "Room EQ Setup" at the Auto Setup / Room
EQ Menu.
Display the Room EQ Setup screen.
Select All or Assign.
• All ............The Equalizer to all Surround mode is set as once.
• Assign .....The Equalizer to each surround mode is to set
individually.
When the All is selected and press the ENTER button, display
the Select the EQ Curve screen.
Select the Equalizer setting.
• OFF .........The Equalizer is not used.
• Normal ....Adjust the frequency response of all speaker
suitable for general surround system.
• Flat ..........Adjust the frequency response of all speakers
flat.
This is suitable for music reproduction like ITU-R
speaker setting.
• Front........Adjusts the characteristics of each speaker to
the characteristics of the front speakers.
• Manual ....Selects the setting value that was set in the
Manual EQ setup
NOTES:
• The Equalizer setting of Normal, Flat and Front can be selected after performing the Auto
Setup.
• When the speaker set as "None" with the Auto Setup is change to on manually, the
equalizer of "Normal", "Front" and "Flat" cannot be used.
• The Equalizer setting can be selected by SURROUND PARAMETER button in Main unit or
Remote control unit.
• When headphone is connected, the Room EQ cannot be used.
Enter the setting.
The Auto Setup / Room EQ Menu reappears.