Denon AVR-985 Operating Instructions Manual page 45

5-5 Setting the Muting Level
• This sets the amount of attenuation at audio output muting.
1
(Remote control unit)
2
(Remote control unit)
3
(Remote control unit)
4
(Remote control unit)
5-6 Setting the On Screen Display (OSD)
• Use this to turn the on-screen display (messages other than the menu screens) on or off.
• Sets the on-screen display's display mode.
Mode 1: Prevents flickering of the on-screen display when there is no video signal.
Mode 2: Flickering is not prevented.
Use this mode if the on-screen display does not appear in the mode 1, as may happen according to the TV being used.
1
(Remote control unit)
2
(Remote control unit)
3
(Remote control unit)
Select "Muting Level" at the Option Setup Menu .
Display the Muting Level screen.
Select the desired setting.
• –20 dB: It is turned down the volume to –20 dB from the
present level.
• –40 dB: It is turned down the volume to –40 dB from the
present level.
• --- dB: It is turned off the volume.
Enter the setting.
The Option Setup Menu reappears.
Select "On Screen Display" at the Option Setup Menu.
Display the On screen display setup screen.
Select "ON" or "OFF".
45