• Operating the surround mode and surround parameters from the main unit's panel.
1
Turn the SELECT knob to select the surround mode.
(Main unit)
• When turned clockwise
DIRECT
• When turned counterclockwise
DIRECT
VIRTUAL
To select the surround mode while adjusting the surround parameters or tone control, press the surround mode button then operate
the selector.
2
(Main unit)
3
Display the parameter you want to adjust, then turn the SELECT knob to set it.
NOTE:
• When playing PCM digital signals or analog signals in the DOLBY PRO LOGIC IIx, DTS NEO:6 modes and the input signal switches to a
digital signal encoded in Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches to a DTS signal, the
mode automatically switches to DTS surround.
78
SELECT
(Main unit)
DOLBY PRO LOGIC
STEREO
VIRTUAL
MATRIX
VIDEO GAME
STEREO
DOLBY PRO LOGIC
MATRIX
VIDEO GAME
Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to set.
• The parameters which can be set differ for the different surround modes. (Refer to "Surround Modes and
Parameters" on page 81.)
II
x
DTS NEO:6
5/7CH STEREO
MONO
CLASSIC
MOVIE
CONCERT
II
x
DTS NEO:6
5/7CH STEREO
MONO
CLASSIC
MOVIE
CONCERT
1
SUPER STADIUM
WIDE SCREEN
JAZZ CLUB
ROCK ARENA
WIDE SCREEN
SUPER STADIUM
JAZZ CLUB
ROCK ARENA
2
1, 3