Denon AVR-985 Operating Instructions Manual page 77

DSP surround simulation
• To operate the surround mode and surround parameters from the remote control unit.
1 Select the surround mode for each input
channel.
(Remote control unit)
The surround mode switches in the following order each time
the DSP SIMULATION button is pressed:
WIDE SCREEN
VIRTUAL MATRIX
Press the surround patameter button.
2
Display the surround parameter screen.
(Remote control unit)
* S u r r P a r a m e t e r
R O O M : M e d i u m
Set the parameters.
3
(Remote control unit)
4 When the surround parameters are set using the buttons on
the main unit, stop operating buttons after completing the
settings. The settings are automatically finalized and the
normal display reappears after several seconds.
When the settings are made using the buttons on the remote
control unit, press
PARAMETER" button to finish.
NOTES:
• The surround speaker setting can also be changed with the SPEAKER button on the remote control unit.
• When "Default" is selected and the cursor left button is pressed, "CINEMA EQ." and "D.COMP." are automatically turned off, "ROOM
SIZE" is set to "medium", "EFFECT LEVEL" to "10", "DELAY TIME" to "30ms" and "LFE" to "0dB".
• The "ROOM SIZE" expresses the expansion effect for the different surround modes in terms of the size of the sound field, not the actual
size of the listening room.
• When playing PCM digital signals or analog signals in the DOLBY PRO LOGIC II, DOLBY PRO LOGIC IIx, DTS NEO:6 modes and the input
signal switches to a digital signal encoded in Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches
to a DTS signal, the mode automatically switches to DTS surround.
SUPER STADIUM ROCK ARENA
VIDEO GAME MONO MOVIE CLASSIC CONCERT
The screen for the selected surround
mode appears.
the "ENTER" or "SURROUND
JAZZ CLUB
1
2, 4
3
4
77