3
(Remote control unit)
4
(Remote control unit)
Setting the Trigger Out Setup
5-3, 5-4
• Set the Trigger Out output 1 for the different input sources.
1
(Remote control unit)
2
(Remote control unit)
3
(Remote control unit)
q Select the input source.
4
(Remote control unit)
5
(Remote control unit)
Set the Trigger out 2 Setup in the same way.
44
Select the desired setting.
Variable:
The level can be adjusted freely using the buttons on the remote
control unit.
0 dB, -40 dB:
The output level is fixed at the set level and the volume can no
longer be adjusted.
NOTE:
• When "ZONE2" is selected at System Setup Menu "5-
1.Power Amp Assign", the Zone2 vol. Level is all set to
"Variable" including preout level and this menu is not
displayed.
Enter the setting.
The Option Setup Menu reappears.
Select "Trigger Out 1 Setup" at the Option Setup
Menu.
Display to the Trigger Out 1 Setup screen.
Select the Zone (MAIN or Zone2).
Enter the setting
The Option Setup Menu reappears.
w Select "ON" or "OFF".
(Remote control unit)