Denon AVR-985 Operating Instructions Manual page 64

[5] Checking the currently playing program source, etc.
1
(Remote control unit)
(Main unit)
(Main unit)
Multi-source recording/playback
Playing one source while recording another (REC OUT mode)
1
ZONE 2 /
REC SELECT
(Main unit)
2
FUNCTION
(Main unit)
3 Set the recording mode.
• For operating instructions, refer to the manual of the
component on which you want to record.
4
FUNCTION
(Main unit)
64
On screen display
• Each time an operation is performed, a
description of that operation appears
on the display connected to the unit's
VIDEO MONITOR OUT jack. Also, the
unit's operating status can be checked
during playback by pressing the remote
control unit's ON SCREEN button.
Such information as the position of the
input selector and the surround
parameter settings is output
sequence.
Front panel display
• Descriptions of the unit's operations
are also displayed on the front panel
display. In addition, the display can be
switched to check the unit's operating
status while playing a source by
pressing the STATUS button.
Using the dimmer function
• Use this to change the brightness of
the display.
The display brightness changes in four
steps (bright, medium, dim and off) by
pressing the main unit's DIMMER
button repeatedly.
Press the ZONE2/REC button.
With "RECOUT SOURCE" displayed,
turn the FUNCTION knob to select the
source you wish to record.
• When the FUNCTION goes around, it
turn to the "REC" indicator and the
indicator of the selected source light.
To cancel, turn the function knob and
select "SOURCE".
in
1
2, 4
1
NOTES:
• Recording sources other than digital inputs selected in the REC
OUT mode are also outputted from the Zone2 preout jacks.
• Digital signals are not outputted from the analog REC OUT jacks.
11
2
F U N C T I O N
R E C O U T S O U R C E