Denon AVR-985 Operating Instructions Manual page 33

3
(Remote control unit)
4
(Remote control unit)
5
(Remote control unit)
6
(Remote control unit)
(Remote control unit)
(Remote control unit)
Select the mode.
Select "Auto" or "Manual".
• Auto:
Adjust the level while listening to the test tones produced
automatically from each speaker.
• Manual:
Select the speaker from which you want to produce the test tone to adjust the level.
Select "Test Tone Start".
Select "Yes".
a. When the "Auto" mode is selected:
Test tones are automatically emitted from each speaker.
The test tones are emitted from each speaker in the following
order, at 4-second intervals the first time and second time around, 2-
second intervals the third time around and on:
FL C FR
When the surround back speaker setting is set to "1spkr" for
"Speaker Configuration", this is set to "SB".
Use the CURSOR left and right buttons to adjust all the speakers to the
same volume.
The volume can be adjusted between –12 dB and +12 dB in units of 0.5 dB.
b. When the "Manual" mode is selected :
q Select the speaker.
w Adjust all the speakers to the same volume.
1spkr
SB
SR SBR SBL SL
2spkrs
Example: When the "Auto" mode is selected
Flashing
SW
Example: When the volume is set to –11.5 dB
while the test tone is being
produced from the Front Lch
speaker
33