Other Functions; Convenient Functions; Setting The Optimizing Filter For The Sc-F107 Speaker System (Sold Separately); Auto Function Selector Function - Denon DRA-F107 Owner's Manual

ENGLISH
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
[TUNER]
[MENU]


Other Functions

BUTTON

Convenient Functions

<BUTTON>
[BUTTON]
Setting the optimizing filter for the SC-
F107 speaker system (sold separately)
The receiver's speaker output signal properties are set to be
optimal for the SC-F107 .
1
[MENU]
Press
2
Select "SPK OPTIMISE" using
[ENTER/MEMO]
press the
3
Select "ON" using
[ENTER/MEMO]
The setting is entered.

Auto Function Selector Function

[DOCK 1/3]
When one of the buttons below is pressed, the function switches
to the respective function and playback of that source starts.
[uip]
[DOCK 1/3] ····
•
[ENTER/MEMO]
[TUNER] ··········
•

Last Function Memory

This stores the settings as they were directly before the standby
mode was set.
When the power is turned back on, the settings are restored to as
they were directly before the standby mode was set.
.
[u] [i]
and , then
[p]
or .
[u] [i]
and , then press the
[p]
or .
The function switches to "iPod" and the iPod
starts playing.
The functions switches to "TUNER" and the
band last set is tuned in.

About System Functions

Device supporting system
connections (sold separately)
DCD-F107 (CD Player)
What you can do with the
system functions
When system connections are made between the DRA-F107 and
DCD-F107 (CD Player, sold separately), the operations described
below can be performed.
n
The DCD-F107 can be operated using the
receiver's remote control unit
(vpage 6 "Buttons for operating components connected by
system cable")
n Auto Power On Function
(v "System Function")
n Auto Function
(v "System Function")
n Timer Function
(v "System Function")

Making system connections

In addition to connection of the audio cables, also connect the
system cable.
Also, connect the power cord of the DCD-F107 (CD player, sold
separately) to the AC outlet on the back of the receiver (DRA-
F107).
NOTE
Be sure to plug the DRA-F107's power cord into a wall power outlet.
DRA-F107 (This unit)
System cable
To a wall power (Included with the
outlet DCD-F107)
DCD-F107