Adapt Tool Data; Overview Of Tool Data T2; Tool Orientation Wo: 1; Tool Angle A: 93 - HEIDENHAIN MANUALPLUS 4110 Manual

Create tool T2 by copying

Adapt tool data


Press the Change soft key

Place the cursor on the input
field Tip angle B:
Press the arrow key
repeatedly

Tip angle B: 55°

Save the tool data T2:
Press the Save soft key

Overview of tool data T2

Setup dimension X in X: 92 mm
Setup dimension Z in Z: 62 mm
Cutting radius R: 0.8 mm

Tool orientation WO: 1

Tool angle A: 93°
Tip angle B: 55°
HEIDENHAIN MANUALplus 4110 Tool Management
Wear compensation DX in X: 0 mm
Wear compensation DZ in Z: 0 mm
Tool text Q: 1
Machining direction MD M3=3, M4=4: 3
Cutting speed TS: 200 m/min
Feed rate TF: 0.4 mm/rev
Lifetime PT/Quantity PZ: –
4.6