HEIDENHAIN MANUALPLUS 4110 Manual page 60

Entering the machine data
Assume the tool, cutting speed and feed
rate from the tool file:

Open the tool file:
Press the Tool list soft key

Press the Take over tool
soft key

Press the S, F from tool
soft key
Entered and assumed machine data

Tool number T: 1

Cutting speed S: 200 m/min

Feed rate per revolution F:
0.4 mm/rev

Maximum shaft speed D: 2000 rev/min

Stopping angle A: No entry

Activate machine data:
Press the Save soft key
The maximum speed depends on the machine and the clamped workpiece.
Confirm tool

Confirm T1 with the tool-change key

Return to the main menu:
Press the Back soft key
HEIDENHAIN MANUALplus 4110 Machine Setup 6.2