HEIDENHAIN MANUALPLUS 4110 Manual page 34

Creating tool T8
Threading tool T8
Specify the position in the tool manager

Place the cursor on position
T8: Press the arrow key
repeatedly

Add a new tool:
Press the Add soft key

Select the tool type:
Press the Threading tool
menu key
Enter the tool data (part 1)

Setup dimension X in X: 0 mm

Setup dimension Z in Z: 0 mm

Tool orientation WO: 1
(outside tool, machining direction
toward the chuck)

Wear compensation DX in X: 0 mm

Wear compensation DZ in Z: 0 mm
HEIDENHAIN MANUALplus 4110 Tool Management
The setting dimensions are preliminarily entered
as 0.
4.10