HEIDENHAIN MANUALPLUS 4110 Manual page 97

Create the "Threaded stud" cycle program
Select tool compensation
Situation after performing the threading
cycle

Press the Tool offset soft
key

Press the X offset for tool
soft key
Compensating the threading tool

Set the handwheel resolution for
compensation

Set tool compensation with the X
handwheel
The compensation set via handwheel is
shown in the Delta X field (example:
0.04 mm)

Assume the compensation:
Press the Save soft key
The saved compensation value is
shown in the T8 dx field (example:
0.04 mm)

Conclude compensation:
Press the Back soft key
HEIDENHAIN MANUALplus 4110 Linear Machining Example 7.31