Front Panel Details And Usage - Lexicon MPX 200 - REV 1 Manual

Getting Started

FRONT PANEL DETAILS AND USAGE

COMPRESSOR LEDs
Show the amount of gain
reduction being obtained.
Input Knob
Sets the level of the
incoming signal.
Input
LEVEL
L R
- Clip
- 12dB
- 30dB
Input LEVEL LEDs
Green = Presence of an input
signal for L & R channels.
Red = Indicates Input saturating
for that channel; or, the
internal processing is
saturated.
1-2
EFFECTS and ROUTING LEDs
Indicate which effects are selected and,
for dual-effects programs, which routing
is selected.
COMPRESSOR EFFECTS
Threshold Compressor Plate Hall
- 3dB Chamber Room Ambience
- 10dB Gate Flange Chorus
- 20dB Echo/Delay Rotry/Trmlo Pitch/Detune
EDIT Parameter Display
Indicates which parameter is
selected for editing.
Load Button
Causes the cued program to load. Lights
to indicate that the program cued is
different from the program currently
running.
Edit Button/MIDI LED
Lights to indicate that the current program
has been altered from the original. When
blinking, there is MIDI activity. To return to
cueing new programs, press the Load
button.
ROUTING (DUAL) EDIT
C Mix Ratio
Adjust Threshold
C
EQ Attack
C
Lvl/Bal Release
C
Compressor Button
When on, the red LED is lit and the 4 LEDs labeled
Compressor show the amount of gain reduction
being obtained.
Store Button
Indicates Store is active. (When pressed with
Tap, activates MIDI learn.)
Load Compressor
MIDI
Edit
Adjust Knob
Multi-function knob to select effects and
routing, control edit functions, change
parameter values. Functions are
assignable by pressing Load, Edit, etc.
Bypass Button
Mutes or bypasses the signal, depending on the setting
of the system Bypass parameter. Also accesses System
parameters when pressed for 2 seconds.
Tap Button
Flashes for Tempo-based programs. Press twice to set a
tempo. Hold to have input level determine tempo.
(When pressed with Store, activates MIDI learn.)
Lexicon, Inc.
Power
Bypass
System
Learn
Store Tap/Cancel