Menu Mode; Using The Menu; Menu Mode Reset - Yaesu FT DX 9000 CONTEST - MANUAL 2 Operation Manual

M M
ENU ODE
The Menu system of the FT
ceiver just the way you want to operate it. The Menu items are grouped by general utilization category, and are numbered
from "AGC 1" to "TX GNRL 160."
1. Press the MNU key (#
list will appear on the LCD display, and you will see
the Menu Number, Menu Groups, Menu Items, and
the current settings for each item displayed on the
LCD display.
2. Rotate the Main Tuning Dial (#
Menu item you wish to work on.
3. Rotate the CLAR/VFO-B knob (#
current setting of the selected Menu item.
4. When you have finished making your adjustments,
press and hold in the MNU key (#
onds to save the new setting and exit to normal opera-
tion. If you only momentarily press the MNU key
(# ), the new settings will not be retained.
You may reset all the Menu settings to their original factory defaults, if desired.
1. Turn the front panel POWER switch (#
2. Press and hold in the MNU key (#
transceiver back on. Now release the MNU key (#
Page 110
9000 Contest provides extensive customization capability, so you can set up your trans-
DX
U
SING THE
) momentarily. The Menu
) to select the
) to change the
) for two sec-

Menu Mode Reset

) off.
), and while holding it in, press the POWER switch (#
M
ENU
Menu Number
).
FT 9000 C
DX ONTEST
MAIN Dial Knob MNU key
CLAR/VFO-B Knob
Menu Group
Menu Item
Menu Setting
) to turn the
O M
PERATION ANUAL