Table of Contents
Advertisement
Setup (Menu) Mode
The FTM-3200DR Setup (Menu) mode, already described in parts of many previous
chapters, is easy to activate and setup. The Menus may be used to configure many
of transceiver parameters, some of which have not been detailed previously. Use the
following procedure to activate the Setup (Menu) mode:
1. Press and hold the [ MHz ( SETUP )] key for
one second to enter the Setup menu.
2. Rotate the DIAL knob to select the Menu
Item to be adjusted.
3. Press the [ MHz ( SETUP )] key momentarily
to enable adjustment of the selected Menu
item, and then rotate the DIAL knob to per-
form the actual adjustment.
4. After completing the selection and adjust-
ment, press and hold the [ MHz ( SETUP )] key
for one second to exit the Setup menu and
resume normal operation.
Menu Item
Enables/Disables the Automatic Power
1: APO
Off feature.
Enables/Disables
2: BCLO
Lock-Out feature.
3: BEP KEY
Enables/Disables the key beeper.
Enables/Disables the Band-edge beeper
4: BEP EDGE
while scanning.
5: BEP STBY
Enables/Disables the Standby beep.
Selects the CTCSS/DCS/EPCS Bell Ring-
6: BELL
er repetitions.
7: CLK TYPE
Shifting of the CPU clock frequency.
8: DC VOLT
Indicates the DC Supply Voltage.
9: DCS CODE
Setting of the DCS code.
Select a combination of DCS inversion
10: DCS INV
codes in terms of communication direc-
tion.
11: DIG AMS
Sets the transmission mode.
12: DI POPUP
Sets the information pop-up time.
13: DPID LST
DP-ID list (Display/Register/Clear)
Enables/Disables the DTMF Autodialer
14: DT AUTO
feature.
Setting of the DTMF Autodialer TX Delay
15: DT DELAY
Time.
Loading of the DTMF Autodialer Memo-
16: DT SET
ries.
24
Function
the
Busy
Channel
FTM-3200DR/DE Advance Manual
VOL
SQL
REV
D/A
M H z
TXPO
D W
SETUP
Available Values
0.5H to 12H (0.5H step) /
OFF
ON/OFF
KEY+SCAN / KEY / OFF
ON/OFF
ON/OFF
1 to 20 / CONTINUE /
OFF
A / B
---
104 standard DCS codes
NORMAL / INVERT /
BOTH
TX MANUAL / TX FMFIX
/ TX DNFIX / AUTO
2 / 4 / 6 / 8 / 10 / 20 / 30
/ 60 / CONTINUE / OFF
(Registered DP-ID)
MANUAL / AUTO
50 / 250 / 450 / 750 /
1000
---
DIAL
V / M
M W
Default
OFF
OFF
KEY+SCAN
OFF
ON
OFF
A
---
023
NORMAL
TX MANUAL
10 SEC
---
MANUAL
450 MS
---
Advertisement
Table of Contents
