Setup (Menu) Mode - Yaesu FTM-3100R Operating Manual

The FTM-3100R/E Setup (Menu) mode, already described in parts of many previous
chapters, is easy to activate and setup. The Menus may be used to configure many
of transceiver parameters, some of which have not been detailed previously. Use the
following procedure to activate the Setup (Menu) mode:
1. Press and hold the [ MHz ( SETUP )] key for
one second to enter the Setup menu.
2. Rotate the DIAL knob to select the Menu
Item to be adjusted.
3. Press the [ MHz ( SETUP )] key momentarily
to enable adjustment of the selected Menu
item, and then rotate the DIAL knob to per-
form the actual adjustment.
4. After completing your selection and adjust-
ment, press and hold the [ MHz ( SETUP )] key
for one second to exit the Setup menu and
resume normal operation.
Note: For details, refer to the Advanced Manual (download from the Yaesu website).
Menu Item
Enables/Disables the Automatic Power
1: APO
Off feature.
Enables/Disables the Busy Channel
2: BCLO
Lock-Out feature.
3: BEP KEY
Enables/Disables the key beeper.
Enables/Disable the Band-edge beeper
4: BEP EDGE
while scanning.
Selects the CTCSS/DCS/EPCS Bell
5: BELL
Ringer repetitions.
6: CLK TYPE
Shifting of the CPU clock frequency.
7: DC VOLT
Indicates the DC Supply Voltage.
8: DCS CODE
Setting of the DCS code.
Select a combination of DCS inversion
9: DCS INV
codes in terms of communication direc-
tion.
Enables/Disables the DTMF Autodialer
10: DT AUTO
feature.
Setting of the DTMF Autodialer TX Delay
11: DT DELAY
Time.
Loading of the DTMF Autodialer Memo-
12: DT SET
ries.
Setting of the DTMF Autodialer Sending
13: DT SPEED
Speed.
Enables/Disables the "Priority Channel
14: DW RVRT
Revert" feature.
FTM-3100R/E Operating Manual
Function

Setup (Menu) Mode

VOL
REV M H z
SQL TXPO
D W
SETUP
Available Values
0.5H to 12H (0.5H step)/
OFF
ON/OFF
KEY+SCAN/KEY/OFF
ON/OFF
1 to 20/CONTINUE/OFF
A/B
---
104 standard DCS codes
N O R M A L / I N V E R T /
BOTH
MANUAL/AUTO
50/250/450/750/1000
---
50/100
ON/OFF
DIAL
V / M
M W
Default
OFF
OFF
KEY+SCAN
OFF
OFF
A
---
023
NORMAL
MANUAL
450 MS
---
50 MS
OFF
29