Qmb (Quick Memory Bank); Qmb Channel Storage; Qmb Channel Recall - Yaesu FT DX 9000 CONTEST - MANUAL 2 Operation Manual

The Quick Memory Bank is comprised of five memories (labeled C1 ~ C5) independent from the regular and PMS memo-
ries. These can quickly store operating parameters for later recall.
1. Tune to the desired frequency on the VFO-A.
2. Press the blue (QMB) STO key (#
will confirm that the contents of the VFO-A have been
written to the currently-available QMB memory.
If you repeatedly press the (QMB) STO key, the QMB
memories will be written in the following order:
C-2 C-3 C-4
Once all five QMB memories have data on them, previous
data (starting with channel C1) will be over-written on a
first-in, first-out basis.
1. Press the (QMB) RCL key (#
indicate "QMB" and the current QMB channel's data
will be shown on the main frequency display field.
2. Repeatedly pressing the (QMB) RCL key will toggle
you through the QMB channels:
C-2 C-3 C-4
Advice
You may change the QMB channel's frequency by rotat-
ing the Main Tuning Dial (#
tion, described details on page 101).
" " will replace "
ing you are in the "Memory Tune" mode.
During Memory Tune operation, you may change operating modes,
and engage and offset the Clarifier, if desired.
Press the V/M switch momentarily to return to the originally-
memorized frequency of the current memory channel. One more
press of the V/M key will return you to VFO operation.
QMB is a very convenient means of storing and recalling
memories, if you only have recourse to a few. With one
tough of the (QMB) RCL key, the frequency data will
appear instantly as though you were operating on the VFO-
A.
FT 9000 C
DX ONTEST
QMB C
). The "beep"
C-5 C-1
QMB C
). The display will
C-5 C-1
) (Memory Tune Opera-
" in the multi-panel window, indicat-
O M
PERATION ANUAL
QMB
(Q
UICK
S
HANNEL TORAGE
R
HANNEL ECALL
M B
EMORY
QMB STO key
QMB RCL key
)
ANK
Page 97