Audio Limiter (Afl) Feature; Att - Yaesu FT DX 9000 CONTEST - MANUAL 2 Operation Manual

D R
UAL ECEIVE
If the optional Dual Receive Unit (RXU-9000) is installed, the Audio Limiter (AFL feature is available on both the VFO-
A and VFO-B.
As a reminder, there is no difference in the fundamental performance of the two VFOs. Please see page 65 for details.
VFO-A Band AFL Setup
Press the VFO-A AFL switch (#
dio Limiter. The imbedded LED in the button will glow
red.
To disable the Audio limiter, press the AFL switch once
more; the imbedded LED will turn off.
VFO-B Band AFL Setup
1. Pressing the SUB RX switch (#
Dual Receive operation.
When the imbedded LED glows green, this is your
confirmation that Dual Receive is in operation.
2. Press the VFO-B AFL switch (#
Audio Limiter. The imbedded LED in the button will
glow Umber.
To disable the Audio limiter, press the AFL switch once
more; the imbedded LED will turn off.
If the optional Dual Receive Unit (RXU-9000) is installed, the RF Attenuator (ATT) feature is available on both the VFO-
A and VFO-B.
As a reminder, there is no difference in the fundamental performance of the two VFOs. Please see page 52 for details.
VFO-A Attenuator Setup
Rotate the VFO-A ATT switch (#
attenuation level.
To restore full signal strength through the Attenuator cir-
cuit area, set the ATT switch to the "0" position.
VFO-B Attenuator Setup
Rotate the VFO-B ATT switch (#
attenuation level.
To restore full signal strength through the Attenuator cir-
cuit area, set the ATT switch to the "0" position.
Page 154
( RXU-9000 )
U
NIT
( AFL ) F
A L
UDIO IMITER
) to turn on the Au-
) will engage
) to turn on the

ATT

) to set the desired
) to set the desired
FT
EATURE
AFL Switch
VFO-B
ATT Switch
ATT Switch
VFO-B
9000 C O
DX ONTEST
AFL Switch
VFO-A
VFO-A
M
PERATION ANUAL