Setup (Menu) Mode - Yaesu FTM-3207DR Advance Manual

Modular Plug
Pin 3: GND
Pin 1: PTT/CLONE

Setup (Menu) Mode

The FTM-3207DR/DE Setup (Menu) mode, already described in parts of many previous
chapters, is easy to activate and setup. The Menus may be used to configure many
of transceiver parameters, some of which have not been detailed previously. Use the
following procedure to activate the Setup (Menu) mode:
1. Press and hold the [ MHz ( SETUP )] key for
one second to enter the Setup menu.
2. Rotate the DIAL knob to select the Menu
Item to be adjusted.
3. Press the [ MHz ( SETUP )] key momentarily
to enable adjustment of the selected Menu
item, and then rotate the DIAL knob to per-
form the actual adjustment.
4. After completing the selection and adjust-
ment, press and hold the [ MHz ( SETUP )] key
for one second to exit the Setup menu and
resume normal operation.
Menu Item
Enables/Disables the Automatic Power
1: APO
Off feature.
Enables/Disables the Busy Channel
2: BCLO
Lock-Out feature.
3: BEP KEY
Enables/Disables the key beeper.
Enables/Disable the Band-edge beeper
4: BEP EDGE
while scanning.
5: BEP LVL
Sets the beep level
6: BEP STBY
Enables/Disable the Standby beep
Selects the CTCSS/DCS/EPCS Bell
7: BELL
Ringer repetitions.
8: CLK TYPE
Shifting of the CPU clock frequency.
9: DC VOLT
Indicates the DC Supply Voltage.
10: DCS CODE
Setting of the DCS code.
Select a combination of DCS inversion
11: DCS INV
codes in terms of communication direc-
tion.
12: DIG AMS
Sets the transmission mode
13: DI POPUP
Sets the information pop-up time
14: DPID LST
DP-ID list (Display/Register/Clear)
Enables/Disables the DTMF Autodialer
15: DT AUTO
feature.
24
Pin 1: PTT/CLONE
Pin 3: GND
Function
FTM-3207DR/DE Advance Manual
Modular Plug
VOL
SQL REV D/A
TXPO D W
Available Values
0.5H to 12H (0.5H step)/
OFF
ON/OFF
KEY+SCAN/KEY/OFF
ON/OFF
High/Low
ON/OFF
1 to 20/CONTINUE/OFF
A/B
---
104 standard DCS
codes
NORMAL/INVERT/
BOTH
TXMANUAL/TX FMFIX/
TX DNFIX/AUTO
2 / 4 / 6 / 8 / 1 0 / 2 0 / 3 0 / 6 0 /
CONTINUE/OFF
(Registered DP-ID)
MANUAL/AUTO
DIAL
M H z V / M
M W
SETUP
Default
OFF
OFF
KEY+SCAN
OFF
High
ON
OFF
A
---
023
NORMAL
TXMANUAL
10 SEC
---
MANUAL