Yaesu FT DX 9000 CONTEST - MANUAL 2 Operation Manual page 128

M M
ENU ODE
097. SUB-CW-NARROW
Function: Selects the passband of the sub band (VFO-
B) DSP filter for the CW "narrow" mode.
Available Values: 25/50/100/200/300/400 Hz
Default Setting: 300 Hz
Advice: If the Dual Receiver Unit (RXU-9000) is not
installed, changing this setting will have no effect.
098. SUB-PSK-SHAPE
Function: Selects the passband characteristics of the
sub band (VFO-B) DSP filter for the PSK mode.
Available Values: SOFT/SHARP
Default Setting: SHARP
SOFT: Primary importance attached to amplitude
of the filter factor.
SHARP: Primary importance attached to phase of the
filter factor.
Advice: If the Dual Receiver Unit (RXU-9000) is not
installed, changing this setting will have no effect.
099. SUB-PSK-SLOPE
Function: Selects the shape factor of the sub band
(VFO-B) DSP filter for the PSK mode.
Available Values: GENTLE/MEDIUM/STEEP
Default Setting: MEDIUM
Advice: If the Dual Receiver Unit (RXU-9000) is not
installed, changing this setting will have no effect.
100. SUB-PSK-NARROW
Function: Selects the passband of the sub band (VFO-
B) DSP filter for the PSK "narrow" mode.
Available Values: 25/50/100/200/300/400 Hz
Default Setting: 300 Hz
Advice: If the Dual Receiver Unit (RXU-9000) is not
installed, changing this setting will have no effect.
101. SUB-RTTY-SHAPE
Function: Selects the passband characteristics of the
sub band (VFO-B) DSP filter for the RTTY mode.
Available Values: SOFT/SHARP
Default Setting: SHARP
SOFT: Primary importance attached to amplitude
of the filter factor.
SHARP: Primary importance attached to phase of the
filter factor.
Advice: If the Dual Receiver Unit (RXU-9000) is not
installed, changing this setting will have no effect.
Page 126
RX DSP G
ROUP
102. SUB-RTTY-SLOPE
Function: Selects the shape factor of the sub band
(VFO-B) DSP filter for the RTTY mode.
Available Values: GENTLE/MEDIUM/STEEP
Default Setting: MEDIUM
Advice: If the Dual Receiver Unit (RXU-9000) is not
installed, changing this setting will have no effect.
103. SUB-RTTY-NARROW
Function: Selects the passband of the sub band (VFO-
B) DSP filter for the RTTY "narrow" mode.
Available Values: 25/50/100/200/300/400 Hz
Default Setting: 300 Hz
Advice: If the Dual Receiver Unit (RXU-9000) is not
installed, changing this setting will have no effect.
104. SUB-SSB-SHAPE
Function: Selects the passband characteristics of the
sub band (VFO-B) DSP filter for the SSB mode.
Available Values: SOFT/SHARP
Default Setting: SHARP
SOFT:
SHARP: Primary importance attached to phase of the
Advice: If the Dual Receiver Unit (RXU-9000) is not
installed, changing this setting will have no effect.
105. SUB-SSB-SLOPE
Function: Selects the shape factor of the sub band
(VFO-B) DSP filter for the SSB mode.
Available Values: GENTLE/MEDIUM/STEEP
Default Setting: MEDIUM
Advice: If the Dual Receiver Unit (RXU-9000) is not
installed, changing this setting will have no effect.
106. SUB-SSB-NARROW
Function: Selects the passband of the main band
(VFO-A) DSP filter for the "narrow" SSB mode.
Available Values: 200/400/600/850/1100/1350/1500/
1650/1800/1950/2100/2250 Hz
Default Setting: 1800 Hz
Advice: If the Dual Receiver Unit (RXU-9000) is not
installed, changing this setting will have no effect.
FT 9000 C
DX
Primary importance attached to amplitude
of the filter factor.
filter factor.
O
ONTEST PERATION
M
ANUAL