Selecting The Setting For Double-Sided Copying ("Duplex Copy" Parameter) - Konica Minolta bizhub 181 User Manual

6
Selecting the setting for double-sided copying ("DUPLEX COPY" pa-
rameter)
Note
A setting can be selected for this parameter only if the optional duplex
unit is installed.
1
Display the "COPY SETTING 2" menu.
– Refer to "Displaying the "COPY SETTING 2" menu" on page 6-68.
2
Press the [+] or [,] key until "DUPLEX COPY" is selected, and then
press the [OK] key.
3
Press the [+] or [,] key until "OFF" or "ON" is selected, and then press
the [OK] key.
The "COPY SETTING 2" menu appears again.
6-74
Utility mode/Copy mode parameters
bizhub 181