Utility Mode; Utility Mode/Copy Mode Parameters - Konica Minolta bizhub 181 User Manual

6
6

Utility mode/Copy mode parameters

6.1

Utility mode

There are eight parameter in the Utility mode.
No. Name
1 MACHINE SET-
TING
2 PAPER SOURCE
SETUP
3 CUSTOM SIZE
MEMORY
4 USER MANAGE-
MENT
5 ADMIN. MAN-
AGEMENT
6 COPY SETTING 1
7 COPY SETTING 2
8 DIAL REGISTRA-
TION
9 SCAN SETTING
Note
Depending on the options installed, some parameters may not be avail-
able. If an unavailable parameter is selected, an error message appears.
6-2
Utility mode/Copy mode parameters
Description
Used to specify settings for the machine's oper-
ating environment.
Used to specify the size and type of paper load-
ed in the 1st paper drawer. In addition, settings
can be specified for the paper drawers that are
selected during the automatic tray switching op-
eration.
Used to register up to two custom paper sizes.
Used to perform maintenance operations in or-
der to maintain the machine's efficiency.
Used by the administrator to specify settings for
managing the accounts and to specify remote
monitoring settings.
Used to specify the default settings for the vari-
ous copy functions.
This menu item appears only when optional im-
age controller IC-206 or network interface card
NC-503 is installed.
Specify speed dial settings.
For details, refer to the User's Guide for the cor-
responding option.
Used to specify settings when optional image
controller IC-206 or network interface card NC-
503 is installed on the machine. For details, refer
to the User's Guide for the corresponding op-
tion.
Page reference
p. 6-5
p. 6-18
p. 6-27
p. 6-30
p. 6-34
p. 6-52
p. 6-67
-
-
bizhub 181