Section Two - Editing Functions; Editing/Creating A Preset; Amp/Cabinet Modeling; Editing Amp Models And Cabinet Types - DigiTech GNX1 User Manual

S T - E
ECTION WO

Section Two - Editing Functions

Editing/Creating a Preset

The GNX1 was designed to make the process of sound creation easy and intuitive. Because the GNX1 provides both
Amp Modeling and Effects Processing, the editing functions have been divided into two sections; the Amp/Cabinet
Modeling section which provides editing for the Amp and Cabinet Modeling, and the Effects section which provides
editing of the extensive Effects library.The GeNetX™ technology contained in the GNX1 allows you to go much
further than mere Amp Modeling. GeNetX™ lets you create your own Amp/Cabinet HyperModel™, tune the resonant
frequency of the speaker cabinet and store this custom creation to a User Amp/Cabinet location.When editing either
the Amp/Cabinet Modeling, or the Effects section, you must start with one of the User or Factory Presets. It is not
possible to start with a completely empty Preset.The Preset you begin with does not necessarily need to be the
location which you intend to have it reside, as you can save your creation to any User Preset location during the store
process.To begin creating a HyperModel™ or just editing the Effects, you will have to select a Preset which will be
your starting point by using the Footswitches or Data Up/Down buttons.

Amp/Cabinet Modeling

Once you have selected a Preset you wish to edit, you can select the Amp Models or Cabinet Types for your Preset.
Amp/Cabinet Modeling is a technology which applies the tone of one of several vintage or modern Amp Models and
Cabinet Types to your guitar signal. The GNX1 includes accurate emulations of 15 popular Amp Models, 1 Acoustic
Guitar Simulation, and 6 Speaker Cabinet Types.Your choices include:
Amp Models
DIRECT 1 - Turns the amp modeling off
BLKFAC
2 - Based on a '65 Fender Twin Reverb
BOUTIQ 3 - Based on a Matchless DC30
RECTIF
4 - Based on a Mesa Dual Rectifier
HOTROD 5 - Based on a Mesa Boogie Mark II C
tweeD
6 - Based on a '57 Fender Tweed Deluxe
BRTCMB 7 - Based on a Vox AC30 top boost
CLNTUB 8 - A clean tube combo setting
BRTSTK
9 - Based on a '78 Marshall Master Volume
Marshall® is a registered trademark of Marshall Amplification Plc. Vox® is a registered trademark of Korg UK. Fender, Matchless, HiWatt, and
Mesa Boogie, are trademarks of their respective companies and are in no way associated with DigiTech.
Cabinet Types
CAB OF 1 - Turns the cabinet modeling off
AM2X12 2 - American 2x12
BR4X12 3 - British 4x12
V 4X12 4 - Vintage 30 4x12
BR2X12 5 - British 2x12

Editing Amp Models and Cabinet Types

Each Preset in the GNX1 is equipped with a Green, Red, and Yellow (Warped) Amp Channel.The Green and Red Amp
Channels include individually assignable Amp Models, Cabinet Types, Gain, EQ, and Level settings.The Speaker Cabinet
can also be tuned meaning that you can select the Cabinet's resonant frequency. Once these Parameters have been
adjusted for the Green and Red channels, they can be toggled instantly by use of the Amp Channel Footswitch
(only when FX Mode is active).The Amp Models, Gain, EQ, and Level characteristics selected for the Green and Red
channels can then be Warped together resulting in a completely new HyperModel™.
12
F
DITING UNCTIONS
CRUNCH 10 - A nice crunchy tube amp combo
HIGAIN 11 - A high gain tube amp
BLUES 12 - A sweet blues tone
MODGAN 13 - Based on a Marshall JCM900
FUZZ 14 - A vintage fuzz distortion
BASSMN 15 - Based on a Fender Bassman
HIWATG 16- Based on a HiWatt 50 watt stack
ACOUST 17 - A flat top acoustic guitar
EMPTY U1 to U9 - User HyperModel™ Locations
AM1X12 6 - American 1x12
BL2X12 7 - Blonde 2x12
FN4X12 8 - Fane 4x12
GR4X12 9 - Greenback 4x12
EMPTY U1 to U9 - User Locations