Bank Names; Midi Channel; Midi Bulk Dump; Midi Preset Dump - DigiTech GNX1 User Manual

S F - O
ECTION IVE

Bank Names

The GNX1 provides the ability to customize the names of each of the 16 User Banks where the 48 User Presets
reside. Customized Bank names aid in quickly identifying the User Bank containing the Presets you may need for a
particular song or set.The procedure for naming the User Banks is as follows:
1. Press the Utility button once.The LED in the Utility button will light indicating you are in the Utility section.
2. Using the FX Mode or Rhythm button, scroll to the left or right until the alpha-numeric Display shows BANKS.
3. Use the Data Up/Down buttons to select the User Bank you wish to rename.
4. Press the Store button once which takes you into the naming menu.The far left alpha-numeric character of the
Bank name begins to blink.
5. Use the Data Up/Down buttons to select the desired alpha-numeric character.
6. Press the Rhythm button to select the next character to the right, or the FX Mode button to select the previ-
ous character to the left.
7. Repeat steps 4 and 5 until the desired Bank name is shown in the Display
8. Once the desired Bank name is showing in the Display, press the Store button again.The Display will briefly show
NAMSVD indicating that the Bank name has been saved, and then return to the new Bank name.
9. Press the Exit button to return to the GNX1 Presets.

MIDI Channel

The MIDI channel in the GNX1 is used for receiving incoming MIDI data only. The GNX1 does not send out any
MIDI program change commands or CC data.The procedure for selecting the MIDI channel is as follows:
1. Press the Utility button once.The LED in the Utility button will light indicating you are in the Utility section.
2. Using the FX Mode or Rhythm button, scroll to the left or right until the alpha-numeric Display shows MIDICH.
The numeric Display will show the currently selected MIDI channel.
3. Press the Data Up/Down to select the desired MIDI channel. your choices include 1 through 16, al (all), and OF
(off).
4. Press the Exit button to return to the GNX1 Presets.
Bulk Dump
The Sysex Bulk Dump menu allows up loading of all the GNX1 Presets and Utility data to a sysex librarian, or MIDI
recording device.This is useful for making a backup copy of all your customized settings.The procedure for perform-
ing a Bulk Dump is as follows:
1. Connect a MIDI cable from the GNX1 MIDI Out to the the MIDI In of a MIDI recording device.
2. Press the Utility button once.The LED in the Utility button will light indicating you are in the Utility section.
3. Using the FX Mode or Rhythm button, scroll to the left or right until the alpha-numeric Display shows BLKDMP
(Bulk Dump).The Store button begins blinking indicating that you must press the store button in order to send a
bulk dump.
4. Set the MIDI recording device to record.
5. Press the Store button to begin the dump.The Display reads SNDBLK until the dump is complete at which time
the Display will return to showing BLKDMP.
6. Press the Exit button to return to the GNX1 Presets.
Note: The Bulk Dump will send information on the MIDI channel defined in the MIDI Channel menu.

MIDI Preset Dump

The Sysex Preset Dump menu allows up loading of just the GNX1 Presets to a sysex librarian, or MIDI recording
device.This is useful for making a backup copy of your customized Presets, or loading your Presets into another
GNX1.The procedure for performing a Sysex Preset Dump is as follows:
1. Connect a MIDI cable from the GNX1 MIDI Out to the the MIDI In of a MIDI recording device or the MIDI in of
another GNX1.
2. Press the Utility button once.The LED in the Utility button will light indicating you are in the Utility section.
36
F
THER UNCTIONS