DigiTech GNX1 User Manual page 10

S O - I
ECTION NE
7. Data Up/Down Buttons - These buttons are used to increase and decrease the currently selected Preset in
8. Mode Buttons - These 6 buttons are used to select various modes in which the GNX1 will function.The Exit
button performs a single function while the other 5 buttons perform dual functions based upon the
current operation of the GNX1.The buttons are labeled as follows:
A) FX Mode - The FX Mode button selects whether the 1-3 footswitches will recall Presets within the selected
Bank, or act as on/off switches for the individual effects in the currently selected Preset.The FX
Mode button will light when the switches are performing effects on/off functions.The function of
this button changes to select the previous character when naming a Preset, or select the previous
menu in Utility mode.
B) Exit - This button acts as a panic button and is used to escape from any mode or level of editing returning the
GNX1 to Performance mode.
C) Rhythm - The Rhythm button is used to access the Rhythm Trainer drum loop feature in the GNX1.When the
Rhythm feature is selected, the LED will light, the drum loop begins playing, and the bottom row of
Mode buttons can be used in conjunction with the Data Up and Down buttons to select and edit the
Pattern,Tempo, and Level.The function of this button changes to select the next character when
naming a Preset, or select the next menu in Utility mode.
D) Store - The Store button is used to save your custom edits to the user Presets.The function of this button
changes to select Pattern in Rhythm mode.
E) Utility - The Utility button provides access to several global functions including Output Mode,Target System
Setup,Volume Pedal Update,V-Switch, Pedal Calibration, Bank Names, MIDI Channel, Sysex Dumps,
MIDI Mapping, MIDI Merge, and Factory Reset menus.The function of this button changes to select
Tempo in Rhythm mode.
F) Amp Save - This button is used to store any changes made to the characteristics of Amps and Cabinets (tone,
gain, level, amp type, cabinet type, warp, or cabinet tuning) as HyperModels™ for later retrieval or
warping.The function of this button changes to select Level in Rhythm mode.
9. Bank/Preset Footswitch - The function of this switch will change depending upon whether the FX Mode is active or
10. Expression Pedal - The Expression Pedal controls the assigned Effect Parameter in real time. Most Parameters
4
NTRODUCTION
Performance mode, value of currently displayed parameter in edit mode, the value or
status of the currently selected Utility or Rhythm function, or the alpha-numeric
character in the naming procedure.
inactive.When FX Mode is active, this switch is used to change Presets. Successive
presses of this switch will advance through all User Presets (indicated by a green LED),
and Factory Presets (indicated by a red LED). Pressing and holding this switch will
descend backwards through all User and Factory Presets.When FX Mode is inactive,
successive presses of this switch will advance through all User (indicated by a green LED)
and Factory (indicated by a red LED) Banks. Pressing and holding this switch will descend
backwards through all User and Factory Banks.
within the GNX1 are available for Expression Pedal assignment. Applying extra pressure to the
toe of the Expression Pedal will switch between controlling the assigned Parameter and turning
the Wah on and off.