Midi Merge; Factory Reset; G E Nedit ™ Editor/Librarian - DigiTech GNX1 User Manual

S F - O
ECTION IVE

MIDI Merge

The MIDI Merge function is used to echo the incoming MIDI data to the MIDI Out port of the GNX1.This is useful
when multiple MIDI devices are chained together, and you wish to pass the incoming MIDI Data on to MIDI devices
downstream from the GNX1.The procedure for enabling or disabling the MIDI Merge function is as follows:
1. Press the Utility button once.The LED in the Utility button will light indicating you are in the Utility section.
2. Using the FX Mode or Rhythm buttons, scroll to the left or right until the alpha-numeric Display shows
MMERGE (MIDI Merge).The red numeric Display will read either On (on) or OF (off) depending upon the current
status of the MIDI merge function.
3. Press the Data Up/Down buttons to select the desired status.
4. Press the Exit button to return to the GNX1 Presets.

Factory Reset

This function resets the GNX1 to its original factory settings.This procedure will erase all custom user Presets,
Utility settings, and recalibrate the Expression Pedal.
ATTENTION: Performing this function will erase all user-programmed data. All such data will be lost forever!
Be sure you want to erase the memory and start fresh before continuing with this procedure.
The procedure for performing a Factory Reset is as follows:
1. Press the Utility button once.The LED in the Utility button will light indicating you are in the Utility section.
2. Using the FX Mode or Rhythm buttons, scroll to the left or right until the alpha-numeric Display shows RESET
(Reset).
3. Press the Data Up button once.The Display reads NO Yes (No Yes) and the NO is blinking.
4.This is your last chance to change your mind. Pressing the Data Down or Exit button while the no is blinking in
the Display will abort the Reset procedure.
5. If you are sure that you want to reset all user settings, press the Rhythm button once to make the word YES
begin blinking in the display.
6. Pressing the Store button will reset the GNX1.The display will return to the Reset screen
7. Press the Exit button to return to the GNX1 Presets.
G N ™ Editor/Librarian
E EDIT
The creative flexibility of the GNX1 is impressive by itself. However, the possibilities are endless when you install the
G N ™ Editor/Librarian software in your home computer. Before installing the G
E EDIT
connect the MIDI out from your computer to the MIDI In on the GNX1. Connect from the MIDI Out on the GNX1
to your computer's MIDI In.Then insert the G
PC
If the G N ™ setup window does not appear on your monitor automatically, just select Run from your start
E EDIT
menu, and double click on the Setup.exe file in your CD ROM drive.The G
intuitive and includes help menus to answer any questions, as well as guide you through programming and controlling
the GNX1.
Mac
If the G N ™ setup window does not appear on your monitor automatically, double click on the CD icon in your
E EDIT
display.When the G
E
information and instructions for running the G
are finished with the Read Me file, close the document and double click on the Installer icon and follow the installa-
tion instructions from there.
38
F
THER UNCTIONS
N
E
N ™ window opens, double click on the "Read Me" file.This document will provide the latest
EDIT
™ CD ROM into the CD ROM drive on your computer.
EDIT
N ™ software.You may want to print this document out.Once you
E EDIT
N ™ CD in your Mac or PC,
E EDIT
N ™ Editor/Librarian software is
E EDIT