Triggered Phaser; Tremolo; Panner; Vibrato - DigiTech GNX1 User Manual

S T
ECTION HREE
Triggered Phaser (TRGPHA)
A Triggered Phaser is the same sound as a regular Phaser but allows you to choose the starting point of the
Phaser sweep. In a regular Phaser, the low frequency oscillator (LFO) is continually changing the phase of the signal.
This means that when you begin to play, the phaser may be at the any random point of the phase.With a Triggered
Phaser, every time the signal exceeds the Sensitivity level setting, the Phaser will begin at the point of phasing that
you designate with the value of the LFO Start Parameter.
Parameter 1 - The Number 2 Knob adjusts the rate (SPEED) of the modulating phase. Ranges from 1 to 99.
Parameter 2 - The Number 3 Knob adjusts the strength the signal must be (SENSTV) in order to trigger the
Phaser. Ranges from 1 (requiring strong signals to trigger) to 99 (triggers with weak signals).
Parameter 3 - The Number 4 Knob selects the Phaser sweep starting point (LFO ST). Ranges from 0 to 99.
Mod Mix - The Number 5 Knob controls the mix of wet and dry signal. Ranges from 0 (all dry) to 99 (all wet).
Tremolo (TREMLO)
A Tremolo effect modulates the volume of the signal at an even rate.
Parameter 1 - The Number 2 Knob adjusts the rate (SPEED) at which the volume modulates. Ranges from 1 to
99.
Parameter 2 - The Number 3 Knob adjusts the intensity (DEPTH) of the modulating volume. Ranges from 0 to
99.
Parameter 3 - The Number 4 Knob selects the type of wave form the modulation will use. Choices include:
TRINGL (triangle), SINE (sine), and SQUARE (square).
The Number 5 knob has no function when the Tremolo is selected.
Panner (PANNER)
An Auto Panner modulates the sound from left to right at an even rate.
Parameter 1 - The Number 2 Knob adjusts the rate (SPEED) at which the signal pans from side to side. Ranges
from 1 to 99.
Parameter 2 - The Number 3 Knob adjusts the intensity (DEPTH) of the changing pan. Ranges from 0 to 99.
Parameter 3 - The Number 4 Knob selects the type of wave form the modulation will use. Choices include:
TRINGL (triangle), SINE (sine), and SQUARE (square).
The Number 5 knob has no function when the Panner is selected.
Vibrato (viBRTO)
A Vibrato effect modulates the pitch of the incoming signal at an even rate.
Parameter 1 - The Number 2 Knob adjusts the rate (SPEED) at which the pitch modulates. Ranges from 1 to
99.
Parameter 2 - The Number 3 Knob adjusts the intensity (DEPTH) of the modulating pitch. Ranges from 1 to 99.
Parameter 3 - The Number 4 Knob selects the type of wave form the modulation will use. Choices include:
TRINGL (triangle), SINE (sine), and SQUARE (square).
Rotary Speaker (ROTARY)
Rotary Speaker is an emulation of a device that included a spinning horn and rotor (woofer).The rotation of these
two speakers produced an interesting combination of the sound panning from side to side, as well as a slight pitch
change due to speed of the sound coming towards, and then going away from the listener.
Parameter 1 - The Number 2 Knob adjusts the rate (SPEED) of the spinning speakers. Ranges from 0 to 99.
Parameter 2 - The Number 3 Knob controls the intensity (DEPTH) of the Effect. Ranges from 0 to 99.
Parameter 3 - The Number 4 Knob controls the Pitch Shift (DOPPLR) effect which is the ratio between the
horn and the rotor positions. Ranges from 0 to 99.
* Parameter 4 - Selects the crossover frequency between the horn and rotor. Ranges from 200Hz to 1500Hz.
Mod Mix - The Number 5 Knob controls the mix of wet and dry signal. Ranges from 0 (all dry) to 99 (all wet).
* These Parameters are only available using the G
22
- E P
FFECTS AND ARAMETERS
N ™ computer editor software.
E EDIT