A Guided Tour Of The Gnx2; The Front Panel - DigiTech GNX2 User Manual

Genetx guitar processor

Hide thumbs Also See for GNX2:

Table of Contents

Introduction

A Guided Tour of the GNX2

1. Footswitches 1- 4

Depending on the selected mode, these 4 footswitches select presets, change amp channels, and turn

individual effects on and off. Bypass, accesses the Tuner, or controls Learn-A-Lick functions.

2. Matrix

The Matrix LEDs light identifying the active effects for the selected preset in performance mode, or

the selected row of effects in edit mode.

3. Effect Select Buttons

The Effect Select buttons are used together with the Matrix LEDs to choose the effects you want to

edit.

4. Status Button

In performance mode, the Status button selects the Green or Red Amp Channel. It also activates the

amp and cabinet Warping feature (indicated by a yellow LED next to the Status button). In Edit mode

it turns the selected effect on and off, or selects a controller type for the expression assignment.

5. Parameter Knobs

In performance mode, these 5 knobs select Amp Models, Speaker Cabinets, and Warp Models. In

Green or Red mode, they adjust the Amp Gain, EQ and Level of the selected amp channel. In Edit

mode, they adjust the parameters listed in the column directly below each knob for the selected

group of effects.

Table of Contents