Storing/Copying A Preset - DigiTech GNX2 User Manual

Editing Functions
Rotating the parameter knobs increases or decreases the value of the parameter and you hear the change in
real time. When parameter values have changed, the Store LED lights indicating the preset has been modified
and needs to be stored (see page 16 for more on the store procedure). Changing presets, or turning the
power off before storing any changes will erase your changes and revert to the stored values. When the pre-
set has been edited, you may store your settings to any of the 64 User Preset locations.

Storing/Copying a Preset

When editing a preset, the Store LED lights indicating you have changed a parameter and need to store
the changes. Once you have modified the Amp Models, Cabinet types, and Effect Parameters, store it to a
User Preset location.The following steps outline the procedure for storing a preset:
1. Press the STORE button.The first letter of the preset name begins flashing.
2. Use the DATA WHEEL to select the alpha-numeric character
3. Press the RHYTHM button to select the next character to the right, and the FX EDIT button to
select the previous character to the left.
4. Repeat steps 2 and 3 until the preset name shows in the display.
5. Once you have entered the name for the preset, press the STORE button again.The current preset
location flashes in the numeric display.
6. Select the User Preset location using the DATA WHEEL.
16