Reverb - DigiTech GNX2 User Manual

Genetx guitar processor
Hide thumbs Also See for GNX2:
Table of Contents

Advertisement

Effects and Parameters
Time - The Number 2 knob adjusts the length of time between repeats. Ranges from 10 MS through
2000MS (10 through 2000 milliseconds) in 10 ms increments. Using the Data Wheel while the
Delay Time is showing in the Display will adjust the Delay Time in 1 ms increments.
Feedback - The Number 3 knob adjusts the number of times the delayed signal will repeat
Ducker Threshold - The Number 4 knob adjusts the level (
* Ducker Attenuation - The Ducker Level selects the amount of attenuation applied to the Delay
* Delay Balance - The Delay Balance adjusts the left/right balance of the Delay signal. Ranges from L
* Spread - This parameter increases or decreases the stereo imaging for the Spread Delay. Range is
1-50.
Delay Level - The Number 5 knob adjusts the volume (

REVERB

Reverb gives the listener a sense that the music is being performed in various acoustical environ-
ments. It can provide the tight acoustics of a small room, or the ambience of huge arena.
Reverb On/Off - The Status button turns the Reverb (
Reverb Type - The Number 1 knob selects the type of Reverb or acoustic environment.The GNX2
STUDIO = Studio
ROOM = Wood Room
CLUB = Club
PLATE = Plate
HALL = Hall
PreDelay - The Number 2 knob adjusts the amount of time (
to reach the first reflective surface in the simulated environment. Ranges from 0 to 15.
Decay - The Number 3 knob adjusts the length of time the Reverb is audible (
to 99.
Damping - The Number 4 knob controls the amount of sound which is absorbed (
simulated environment. Ranges from 0 to 99.
* Reverb Balance - The Reverb Balance adjusts the left/right balance of the Reverb signal. Ranges
Reverb Level - The Number 5 knob adjusts the level (
* These Parameters are only available using the GenEdit™ computer editor software.
28
feedback
(
). Ranges from 1 to 99 and
before the Delay signal is attenuated. Ranges from 0 to 99 and off (
signal when the Ducker Threshold has been exceeded. Ranges from 0 to
99.
99 to R 99.
0 to 99.
provides ten different environments to choose from including:
from L 99 to R 99.
99.
rpt hold
(infinite repeat).
threshld
) the input signal must reach
dly levl
) of the Delay signal. Ranges from
reverb
) on and off.
THEATER = Amphitheater
CHURCH = Church
GARAGE = Parking Garage
ARENA = Arena
SPRING = Spring
PREDeLaY
) it takes for the initial sound
rvb levl
) of the Reverb. Ranges from 0 to
oF
).
DECAY
). Ranges from 1
damping
) in the

Advertisement

Table of Contents
loading

Table of Contents