Tutorial; Select A Preset; Create A Hypermodel; Select The Green Channel Amp And Cabinet - DigiTech GNX2 User Manual

Genetx guitar processor

Hide thumbs Also See for GNX2:

Table of Contents

Tutorial

Suppose you wanted to create your own HyperModel™ that incorporated the sweet tones of a vintage

Tweed using an American 2x12 cabinet, and the ripping distortion of a Rectified Amp with a British 4x12 cabi-

net. Let's also suppose that we want to be able to toggle between an acoustic guitar simulation and this new

HyperModel™ with a preset that gives your single coil pickup a humbucker sound, uses no Compression, has

a Noise Gate that opens quickly, a subtle Chorus effect, no Delay, and a little bit of a Hall reverb.The follow-

ing steps guide you through the process for creating just such a preset in the GNX2.

The first step to create a preset is to select your starting point.You can start with any preset, but for this

example let's start with Preset 40. Use the Footswitches or the Data Wheel to select Preset 40.

For this example, we are going to use a vintage Tweed amp with an American 2x12 Cabinet, and warp it with

a Recitified Amp using a British 4x12 cabinet. Select Preset 40, and the GNX2 is ready to select the Amp

Models (indicated by the Status button's yellow LED).

The LEDs next to the Number 1 and Number 2 knobs are green indicating they will select the Amp and

Cabinet types for the Green Channel. To assign the vintage Tweed amp to the Green Channel, rotate the

Number 1 knob until the display reads

reads

AMer2X12

(American 2x12).

The LEDs next to the Number 4 and Number 5 knobs are red indicating they will select the Amp and

Cabinet types for the Red Channel.To assign the Rectified amp to the Red Channel, rotate the Number 4

knob until the display reads

BRit4X12

(British 4x12).

TWEED

(Tweed). Then rotate the Number 2 knob until the display

rectfied

(Rectified).Then rotate the Number 5 knob until the display reads

Tutorial

Table of Contents