Installing The Face-Up Tray - Xerox DocuColor DocuColor 4 Setup Manual

1.4.2

Installing the Face-Up Tray

1
Install the Face-Up Tray according to the following procedure.
10
1.4 Installation Procedure
Fold the Face-Up Tray upward, then fit the
tray's right coupling arm into the corre-
sponding hole in the printer/copier. When
doing this, make sure that the metal spring
leaf extends downward from the tray and
does not enter the hold.
Fit the Face-Up Tray's left coupling arm
into the corresponding hold in the printer/
copier.