Loading Paper In The Tray - Xerox DocuColor DocuColor 4 Setup Manual

1.4 Installation Procedure
1.4.9

Loading Paper in the Tray

1
Load the paper in the tray by the following procedure.
Do not attempt to print on paper that has already been printed on one side as
it could cause a paper jam.
Refer to "2.2 About the Paper" for details on the types of paper that are
suitable for printing. Also refer to "2.3 Loading Paper" for more details
about setting paper in the Multi Bypass Feeder.
22
Pull the paper tray towards the front as far
as it will go.
Remove the spacer in the paper tray.
In case you have to move the printer/copier in
the future, keep the spacer in a safe place.