Figure - NETGEAR DGN2200-100NAS User Manual

Wireless-N 300 Modem Router DGN2200 User Manual

Figure 4-10

2. Select the Turn Remote Management On check box.
3. Specify what external addresses will be allowed to access the wireless-N modem router's
remote management. For security, restrict access to as few external IP addresses as practical:
• To allow access from any IP address on the Internet, select Everyone.
• To allow access from a range of IP addresses on the Internet, select IP address Range.
Enter a beginning and ending IP address to define the allowed range.
• To allow access from a single IP address on the Internet, select Only this Computer.
Enter the IP address that will be allowed access.
4. Specify the port number that will be used for accessing the management interface.
Web browser access usually uses the standard HTTP service port 80. For greater security, you
can change the remote management Web interface to a custom port by entering that number in
the field provided. Choose a number between 1024 and 65535, but do not use the number of
any common service port. The default is 8080, which is a common alternate for HTTP.
5. Click Apply to have your changes take effect.
When accessing your wireless-N modem router from the Internet, you will type your wireless-
N modem router's WAN IP address in your browser's Address field, followed by a colon (:)
4-12
v1.0, March 2010
Managing Your Network